-
Is the blue input light supposed to blink during charging?
-
Hot Temperature Always On & Fan Kicks In
Hi, I have a 3000x Yeti always plugged into the wall inside of my house and the last week the High Hot Temperature icon is always on the display, even without any device connected. Also the fan starts when I press any of the button of the unit and stays on for a long time. The temperature inside the house is cool, so I…
-
connecting two yeti 400's
If I use the chaining port between two Yeti 400's and the first yeti is connected to a power source, by chaining the two, will the second (without a power connector) yeti get charged OR do I also need it to be powered to source as well?
-
Equalization with Victron 100|30 MPPT?
Hello, Should the Yeti Tanks be equalized? If so I assume it's the voltage and duration specified by the rotary setting on the Victron? Thanks very much! Steve
-
double charging
Hi I have a goal zero 1250 and am connecting 200w of fixed solar using the anderson connection. My question is while its being charged by that am I able to to charge it additionally with a foldable solar panel using the 8mm connect or even the 12v car charger into the 8mm connect at the same time as my fixed solar
-
Yeti 1400 not working
My Yeti 1400 is not working for my 12v fridge below 60% capacity of the battery. Any idea what to do. Dine the three bottom reset already? thx for answer
-
100 boulder briefcase with boulder 100
Hi, can I connect my Boulder 100 briefcase to a Boulder 100? (using the Anderson combiner). I have a Yeti 1000. Thanks
-
Limits / guidelines on cable length -- solar panels
I currently have the standard 4-way splitter and a 35' cable to bring power from my 3 Boulder 200's. Chasing the winter sun, it appears as if moving the panels onto some dormant raised beds further from the house would be necessary, and the 35' cable likely won't quite cut it (my Yeti is in a climate controlled cellar and…
-
New portable solar
We have a diesel mobile generator company and I want to replace some of the generators with mobile solar energy. How can you help me in this field? Please send all the details to my email falconone717@gmail.com
-
Firmware update hang / Yeti 3000 (older version, not X) / 1.7.6 to 1.8.6 incomplete
I attempted to update firmware from the app, it got about 43% done, then I noticed later it said update incomplete. It automatically retries every two hours. it has yeti link and is plugged in to power. How can I successfully update, or prevent it from trying/reset?
-
Venture 75
Why doesn't my Venture75 charge my Surface Pro8 with a ausb-c 15V3 cable for the surface?
-
Can I salvage one Boulder suitcase panel if the other was detroyed?
One of my Boulder panels was run over and destroyed (don't ask) by a truck. The other seems to be fine. I have to believe that I can salvage the remaining panel, but wanted to check to see if anyone has successfully done this and what is involved. TIA.
-
What model can handle a blower for a inflatable movie screen?
I'm a novice with power draw, I need a model that can handle a blower for an inflatable movie screen for 4+ hours. The label on the blower (xpower Model BR-252A) I own reads Rating: 120V, 60HZ, 9.8A
-
1220w power inverter --> Yeti 400
I am installing a 12v 400w solar kit (4-100w panels) to my trailer. There is a 1200w power inverted that provides a 110v plug. Can I plug the 8mm power adapter to the 110v plug to charge the Yeti 400?
-
Yeti 500x Solar Panel Compatibility (Output Specs)
When looking for a solar panel, is VOC or VMP the measure of the max input for the Yeti 500x? Would this solar panel work for the Yeti 500x with an 8mm adapter cable?https://hqsolarpower.com/100-watt-12-volt-monocrystalline-solar-panel-compact-design/
-
Is it safe to have Yeti1250 (or any other model) to charge with ignition on in a van ?
I just want to make sure not to do damage to the battery by overcharging it perhaps. Or does it have built in regulator so overcharging cannot happen ? I wired it to switched terminal so it is being charged with key on. Thank you for any feedback.
-
Slow charging on my 3000x..wow
I have multiple YETIs in our home(s) I have a 3000x that will not charge at a rate higher than 50 watts. The battery was at 50% charge after a recent drawdown. I put my 240 watt charger on it and it ramped up to 240watts, but quickly dropped to 50 and remained there. I tried my new 600watt charger and it did exactly the…
-
How to connect two Boulder 100 to Yeti 500X?
Hi there, I just bought a second Boulder 100 to improve the charging of my Yeti 500X. I read somewhere that a 4x8mm to High Power Port Cable is necessary to chain the two panels together - but my Yeti does not have an Anderson plug socket. How should I connect that cable to the power station? Or did I missunderstand…
-
Yeti1000 - Screen Not Working
Hey friends, We've had a good run with our Yeti 1000 Lithium battery, but recently it's been acting up. I'm not super familiar with these things, so reaching out here to see if anyone has any advice. The issue: The battery basically appears dead - no lights when plugged in to charge, the screen doesn't load, the ports…
-
Can I check in my goal zero 400 lantern in my luggage?
Can I check in my goal zero 400 lantern in my luggage? I do not want to put it in my carry on luggage. I also have the solar panel kit that it came in as a set. Can that be checked in, too?
-
Yeti 400 with 2 chained 100 boulder panels
Are there any issues with just chaining two 100 watt boulder panels together to power a Yeti 400? Thanks
-
Backpacking with Nomad 14
I need to charge Medistrom Pilot-24 battery (24 v 2.5A, discharging 3550mAh) battery in 4 hours or less while backpacking through the forest. Can I use the Nomad 14? What is the best choice?
-
Yeti Car Kit - Cable (cut / reconnect)
Hi I want to install the yeti car kit in my VW T5. There is nothing more than a small place to push through the cable. unfortunately the connector is bigger, so i need to drill or to cut the cable and reassemble it afterwards. question: is that possible? anybody else did this? Thanks!
-
Goal Zero Yeti 3000x
Hello, I want to connect my Goal Zero Yeti 3000x to some solar panels, I see that the ones Yeti sells are more for travel and are more expensive than other brands. I was looking into connecting 2 Renogy 200 watt panels From what I read the yeti is able to support up to 600 watts of input, but will only accept 50v and up to…
-
Sherpa 100AC - QI charger not working after 4 months
i've loved this so far until a couple weeks ago i noticed my iPhone SE (3rd Gen) wasn't fully charged when i left the house. i always leave it laying flat on the QI charger ( yes with the button ON). recently every morning the phone shows -30-60% charge. now i have to plug it in using a cord which is the hassle that the…
-
Charge Controller on Core
Camper with a 12v, 130AH AGM battery. The Boulder 100 panel has a charge controller. I attached the 10 amp connectors to the AGM battery terminals. Is it possible to send 12v from my Yeti 1000 Core to the charge controller and re-charge the AGM battery using the Core ? The connectors on the Core are not those used as 10…
-
Yeti 400 overheating
We have had ours for 4 years and really only use it when we camp for coachella. We have always had a problem with it getting to hot and have to turn it off but now it overheated first day and lost all its charge from only charging 2 phones. We tried to put in on solar panel to charge but it will not charge at all. My…
-
Multiple Yetis?
I have a Yeti 1500X. I'm considering a second Yeti X to put in a different room. Is there a simple way to connect them to a) distribute power or to b) charge from one to the other and without using the tank expansion or home integration kits? It's looks like in another post, the HPP cable was ruled out for having…
-
Crush Light Instructions
Just got our crush lights. Charged fine but can't figure out what sequence of button pushes to have it be just one solid color. Help please! TYIA
-
How can I determine the right GoalZero product?
I am hosting an outdoor event where there is no power. I need to provide power for three food heating lamps, DJ Sound equipment and string LED lights. Can this be powered for 4 hours using a GoalZero Power Station? If yes, which model.