Older Yeti 1400 with MPPT input

Cologero
Cologero Member Posts: 3 ✭✭
in YETI PORTABLE POWER STATIONS

Lately I’ve noticed that the battery will only charge up to 80%.

I tried to reset by pushing unit and input buttons for about 6 seconds.

the input temporarily jumped to 240 but quickly dropped down to zero.

any suggestions?

· Share on FacebookShare on Twitter

Answers

  • Zion_Curtain
    Zion_Curtain Member Posts: 155 ✭✭✭

    @Cologero

    Does this "temporary input jump" only happen when you plug into the MPPT? What happens when you plug into the input on the front face of the Yeti. Speaking of plugging in, it might be helpful to tell us what you are plugging in. Are you using a solar panel or the included power supply?? Do you use the 1400 regularly or is it something you use once or twice a year? It might be a good idea to cycle the 1400 a few times. Drain it to about 45% and charge it back up. Do this 3-5 times and see if it peaks above the 80%.

    · Share on FacebookShare on Twitter
  • Cologero
    Cologero Member Posts: 3 ✭✭

    I was able to get it to recharge to 100%, thanks!

    · Share on FacebookShare on Twitter

Categories