-
Yeti 700 Charging Issue
A few days ago, I took delivery of a Yeti 700. I charged it overnight, via a wall outlet, to 100%. The following day, I noticed it had dropped to 96% while still plugged in. The unit had nothing plugged into it to draw any current. I contacted tech support and was told to reset the unit, discharge the battery then…
-
Yeti 700 AC port trips as soon as anything plugged in
My new yeti 700 worked great for a few weeks, now the AC port trips to red as soon as anything is plugged in to it. Anyone else have this issue? The reset comman list I found on this site does not list the 700, so unsure how to reset it? TIA-
-
Sure wish the Bluetooth on the yeti 1500x would always stay on
The wifi/Bluetooth on the yeti 1500x will go off after a bit if not connected. It's a real hassle to have to press the button everytime to enable it, the only wifi Hotspot I have is my phone so when I leave it shuts off Now the victron solar charger feeding the tank is always on so when I come back I can see it and it's…
-
GZ 1500 AC port cycles on and off
I just got a Yeti 1500 as part of a van build out and am having difficulty getting the AC ports to work. They are constantly cycling on and off. I’m trying to use an induction burner running at 600 watts input and a microwave that runs at 950 watts input. I’ve tested the devices on a competitor’s battery bank and had no…
-
How Do I Reset My Yeti Power Station?
Yeti 200X Reset: 1. Press and Hold the 12V and AC button for 15 seconds. 2. At 15 seconds, let go and everything should shut off on the unit. 3. Try turning on and using the unit. Yeti 500X Reset: 1. Press and hold the units and info button. 2. The display will disappear (except for the battery icon) and then come back. 3.…
-
USB C PD output doesn't work with "Custom" charge profile
The USB C PD output on my 1500x would cease to work intermittently. So I read on the forum here that rebooting could fix that. It did. But I subsequently noticed that the USB C PD port would turn off when I used a "custom" charge profile. (The charge profile reverts to "Performance" when the unit is rebooted.) Why can I…
-
Yeti 300 Firmware Update Not Completing
I have a similar issue to what seems to have been resolved for other models in the thread below. I bought it brand new several months ago and have tried everything including putting it on different internets / hotspots / etc but eventually gave up. I recently had to use it again during a power outage and tried again in…
-
Battery Charge Percentage and Stored Energy don't match
I have a Goal Zero 1500X. It is updated to the latest firmware (1.8.9). When I look at the app, the charge percentage (%) and charge remaining (Wh) values don't seem to match. I am currently seeing 76% state of charge, but only 990/1500Wh (66%). Why does this happen and is there a way to make it accurate?
-
how do I see if my 3000x is fried
My unit just clipped out instantly with normal loading onit. The alternator auto unit still said bank full but all other lights are out. None of the normal resets work including disconnecting the battery and power. Anybody have any ideas or know a real person who can fix it instead of a 17 year old girl in customer service.
-
Yeti 300/500/700 in Europe?
When are these power stations available in Europe?
-
Yeti 500X to charge Macbook Pro 16''
When using USB-C PD to charge a Macbook Pro 16'' the charge does not work, but only the Macbook rings continuously. Also, the Yeti's display shows 0 W from Output. Is this particular unit wrong? I purchased 2 of them and they acted the same. In the advertised video here…
-
API / Smart Home Integration
I just purchased a Yeti Pro 4000 and was surprised that I was not able to connect it to Home Assistant like I can with Yeti 3000X. It would seem that the API on the Pro 4000 is different than the 3000X, or it has been removed altogether. I can only reach a root page that states "Goal Zero Yeti 6G." If the Pro 4000 has an…
-
Hot Temperature Always On & Fan Kicks In
Hi, I have a 3000x Yeti always plugged into the wall inside of my house and the last week the High Hot Temperature icon is always on the display, even without any device connected. Also the fan starts when I press any of the button of the unit and stays on for a long time. The temperature inside the house is cool, so I…
-
Battery reliability for 3000X and tanks?
I am considering installing a home backup system using a 3000X with a couple of tanks and possibly solar panels. My question concerns the battery life of the 3000 x and the tanks. Is there a way to replace the lithium batteries when they eventually die? I know it has a 2-year warranty, but in order to be cost-effective,…
-
Yeti 1250 - which current Solar panels
hi I have a yeti 1250 power station legacy and I was looking at the boulder 100 but they’re not available. Can I use a boulder 100i? not sure what the “I” designation is. If not, what solar panels that are currently offered by gold zero can I use for this power station?
-
Car Charger for the Yeti 700
Is this the correct 12V car charger for the Yeti 700? https://www.goalzero.com/collections/vehicle-accessories/products/yeti-12v-car-charging-cable
-
Poor input cable connection
Has anyone had issues with the input connection cable being loose and not charging? My cable has always had some wiggle room but now it seems to not properly connect or stay connected. I have the 3000. The cable came loose, the battery fully drained and then it didn’t fully charge even overnight even though it was plugged…
-
Logging in to GZ website and iOS app - what is going on?
Am having ongoing problems with logging into the GZ web site and in particular I can no longer use the iOS app because it requires logging in. I have tried resetting my password multiple times now to no avail - I still cannot log in. Am using MacBook and have tried both Safari and Opera. I have no problems with saved…
-
Yeti 300 with Nomad 50
Hello! We're using a Nomad 50 to charge the new Yeti 300. In constant bright sun the best we're able to get is about 20 watts from the panel. That seems really low even with lower efficiency expectations. Let's assume the panel is not the problem - is there something we should be doing on the Yeti 300 to troubleshoot for a…
-
Yeti 700
I bought one of these through the online store for use with my Starlink Roam package. I have had it about a month. Saturday I was sitting near the Yeti using the 100W USB C port to charge my ipad. The Yeti started clicking. I didnt like the sound so I unplugged the ipad and turned off the USB ports. It kept on clicking. I…
-
yeti1000x fell of tailgate need screen
my 6 month old yeti1000x took a leap off my tailgate a few weeks ago and the lcd screen is smashed. I cannot read any of the useful information any longer. I emailed Goal zero service and they said they arent taking any repairs is there anywhere I can get a replacement screen? I have a GZ 200x as well but the 1000 was so…
-
Strange smell 500x
Hello My unit has quite strange smell - since the unboxing. I thought it’s going to go away over time - but after many uses, it’s still little bit stinky. It’s hard to define exactly, but it’s similar to maybe sulfur (no as stronh though). Did You experience the same? Is it normal?
-
Dimensions of 6mm barrel connectors
I would like to build power cables to run devices off of the 6mm barrel connector output. Since you do not provide a 6mm barrel connector to wire leads for this purpose, can you provide the dimensions of the connector so I can source my own?
-
Yeti 3000X seems dead, screen flashes when "charging" from USB
We bought a van that came with a Yeti 3000X. It worked well for a few weeks and powered an overnight trip. When we came home it sat for a bit under trees so the battery slowly dropped to about 20%. We realized we needed to charge it so ordered the 600W AC charger. By the time that arrived and I plugged it in, it was at 4%…
-
Yeti 400 will not take a charge is completely dead?
I have a yeti 400 somehow I had let the power go all the way down to the point that there is no beeps no lights it will not take a charge. is this a replacement of the lead acid battery. or are there more options to check before replacing battery
-
1500X won't charge if both DC to DC and Power Supply plugged in
Is this normal? I have the 1500X installed in my trailer, and have a DC to DC charger plugged into the barrel connector under the 'lid'. No power is being supplied to it (It is powered through the 7 pin connector, and it is not plugged in). If I also plug in the AC adapter that came with it in the front barrel connector, I…
-
Display will not turn off Yeti 200
Came back to camp, my solar panel was hooked up and my display was on. I could not get the display to turn off, and the battery would not charge. At some point it quit charging as it was at 88%. I took it home and charged it which solved the problem of the display. The display discharged about 4% of the capacity per day. I…
-
1500X Firmware Update not completing - breaks Yeti
I initiated a firmware update using the iPhone app. According to the app, the Yeti has been updated to version 1.8.9. Seems odd, as I believe the latest version is 1.8.8. On the Yeti itself, it keeps flashing "upd", as if the firmware was not applied. I've followed the steps…
-
How to force firmware update on Yeti 700?
I just bought a brand new Yeti 700 direct from Goal Zero. The App reports that it has the original firmware version 1.1.6. Firmware version 1.3.1 was released over 4 months ago. When I try to update from the App I get the error message. "Update failed. Try again later. A similar update has already been scheduled". This…
-
Yeti 200x USB-C 60W PD Input/Output port doesn’t seem to work
Hi there, I just bought a Yeti 200x about a week ago and I’m pretty satisfied with the purchase except one thing. When I connect my iPhone charging cable to the USB-C port with 60W PD input/output, nothing happens. USB white LED light is on & all other 3 ports worked fine. Also, can I use the MacBook Pro 70W power adapter…