-
I could not pair the mobile app with my Yeti device
If you are not able to pair the App to your Yeti device, try the reset below. We have found this reset to be the most successful when dealing with Wi-Fi issues. WIFI RESET --------------- Reset: - On the phone go to the WiFi Settings - Find the YetiXXXX network and find the option to "Forget this network" - Kill the app on…
-
mobile app
I had been using my yeti pro 4000 with 3 tanks to power my back up load panel. I check it to see to we are drawing say 690 watts at 98%. Seriously, I walk away from the device, take the trash down the driveway and I get a message saying there is only 4% left and the outlet will be turned off in 2 minutes. I open the app…
-
How do I update the firmware on the Tank Pro 4000
I have three tank pro 4000s and I can’t seem to update the firmware on two of them. Also, the combined power only shows the Yeti and one tank. I can’t get those two tanks to show SoH and other data. Any ideas how to fix this?
-
Does app combine wH of Tanks?
I have the 4000 Pro and one expansion tank When I connect the app with Bluetooth I see the 4000 and also 1 tank. Is the app supposed to combine watts from both the 4000 pro battery and the expansion tank so that I can see that I have a total of 8000 ? All it shows is 3900/4000. I am wondering if I need to do something to…
-
Yeti 1500X Temperature Incorrect
I have a 3yr old Yeti 1500X, and since the last firmware and app update a few months ago the unit temperature seems incorrect. When the unit is in approx 10-12 degC ambient the displayed temp on the app varies as low as -8 degC (and shows 'COLD' on the front panel, hence will not charge). When the unit is in approx 20 degC…
-
1250x firmware update howto
I am attempting to update my Yeti 1250x but have don’t see it on the list to manually add it to the app. Which do I select?
-
How do you change Energy History 24 H. Used Watts scale?
I added 2 new Tank4000s to my Pro4000 yesterday and now the wattage used history values are not readable. I have been using the Haven critical circuit control panel to test one circuit at a time to understand what each circuit uses in a 24-hour period. I was able to isolate one appliance that was not needed which drew too…
-
Yeti Pro 4000 App Issues
I have had my the Pro 4000 with 1 expansion tank now for about 4 weeks. I put it into my sprinter and am learning on the road as I travel with it. I cannot figure out wifi connection on the 4000. I want to be able to monitor history and also have remote control capabilities. I have Internet in the sprinter. I put the app…
-
Goal Zero will not update firmware
Hey Goal Zero I have a Goal zero that will not update firmware. It randomly disconnects when trying to update the firmware. It also will shut down every 15 to 18 hours while connected to power. I have not been able to get the Goal Zero to reset. Any thoughts on how we can update the firmware and fix the Goal Zero from…
-
Yeti1500 not connecting to cloud
looks like I lost connection between Yeti1500 and cloud. My app won’t connect to the Yeti. It was working 2 days ago 🙄. I thought the issue was local and tried reconnecting my device to WiFi ! That didn’t work. Yeti WiFi password was failing finally reset the yeti with the AC and info buttons and tried a new pairing . The…
-
How To Update Your Yeti 300 Firmware to 1.3.1
if you keep getting the same connection timed out please try again error while trying to connect to the cloud ☁️ to do the update do not worry I’m here to save you a migraine. what you want to do if your WiFi set up has those WiFi extender boxes for example I have an ORBI system connected to my WiFi, normally these set ups…
-
History is not working in the app
I have yeti1500x and yeti link And in the app the history is blank . It worked in the past Filmwhare version is 18.8 I did reset the unit but did not work I reinstalled the app did not work What can i do ????
-
I have Yeti 1500x and my Enrgy History is not working.
-
My yeti 1500 is taking forever to charge
I tried wall charging it for almost 24 hours and it only charged 45% and it says it will be another 25 hours until fully charged. Anyone know what this means? I used the regular wall charger for it. Thanks!
-
Mobile App suddenly shows my Yeti 1500X charge as empty and its temperature at 122 F
Yet, the device appears to be quite healthy: 84% charged and 50 degrees F. The app also gives me a warning to update it to 1.8.8 but it is already updated. The app shows that the charge profile is Custom but it actually on "Battery Saver".
-
Oil furnace
Has anyone used a Yeti 3000X to power an oil hot water furnace? My furnace plugs into a wall outlet, so it would be easy to plug it into an extension cord that runs to the yeti. I am nervous about doing this. I would like to hear other peoples’ experiences. Thank you.
-
Feature Request: Scheduled Charging Hours in App
I've got a Yeti 1500x and would love it if the iOS app could incorporate scheduled charging. I'm on a time of use plan with my utility. Would love to schedule my Yeti to charge at a certain time during off peak hours instead of me having to manually plug/unplug the unit.
-
[Feature request] Auto-on/off output on charge
Hi team, Depending on the devices connected to my Yeti powerstation, I would really like to have an option to define the behavior once the powerstation recharges x% above the minimum discharge: restore the output status as it was at the time the minimum discharge was reached. In other words, automatically enable or not the…
-
[Feature request] History graph to show accessible energy
Hi team, I find the history graph a necessity, but I believe it would sense to also display the "accessible energy". This would help to better understand how the power in and out actually impact the capacity. Thanks in advance and kind regards, Marc
-
Yeti Link settings in the mobile App
When I tap on the "Link" option on the mobile App, a screen pops up with the following fields of information: Number of Tanks Expansion Capacity Firmware version (not modifiable) How important is it that the first two fields above accurately represent your setup? "Number of Tanks" is obvious but what should "Expansion…
-
How to export history
Hi all, I wish to look at the power in/out history chart with more comfort than from the app (bigger screen, hence bigger scale). How can I export the power history data from the app, in csv for example? Or from the API? Thanks in advance for your insights Marc
-
Widget
Hi, I suggestion would be too have a widget available for iPhone or Android that will display the Yeti's status without having to click on the app. Clicking on the widget can bring you to the app or have additional selections pop up to make changes. Would be great to have simple visibility to status when Overlanding or…
-
Multiple managers for Goal Zeros
Hey Goal Zero Support, We have several goal zeros that are managed by several members of my team. Each time a new member sets up their phone to monitor the Goal Zeros. The previous person loses access. Do you have a way for us to have multiple people added to devices? If not, Do you have a Windows App that can be used to…