Yeti 6000 and Nomad 200 Panels

Options
Kmac
Kmac Member Posts: 2 ✭✭
edited September 2022 in YETI PORTABLE POWER STATIONS

I have 3 Nomad 200's connected and input power is only registering 250-350 watts (& 11.7 V) in full sun. Shouldn't the input energy be higher? I've checked the connections and all seem to be good. Thanks

· Share on FacebookShare on Twitter

Best Answer

  • Hunter_GZ
    Hunter_GZ Administrator Posts: 44 admin
    Answer ✓
    Options

    @Kmac At that voltage it seems like you battery is pretty close to full charge. It is possible that the Yeti is beginning to regulate the input down for a full charge. Is good direct sun without a lot of extension cables we would expect 65-80% of the rated wattage from the solar panels 390W- 480W but this is very dependent on a lot of different factors. We would recommend draining the battery lower to around 50% or less to see if you see a higher input from the 3x Nomad 200s. As well you could attempt to plug each Nomad 200 in individually first to make sure they are all functioning in a similar manner.

    · Share on FacebookShare on Twitter

Answers

Categories