Sherpa 100PD won't charge from 60w USB-C port

Jay_Water_for_Good
Jay_Water_for_Good Member Posts: 3 ✭✭

Hello, I have a small foldable 60w panel, with both USB-C and USB QC 3.0. The Sherpa charges just fine when I have it on the USB QC 3.0 port, I've done a few full cycles with it. But when I attach it to the USB-C port, it will draw power for a second, flash off, draw power for a second, flash, off, do this a few times, then just stop charging.


The solar panel is fine - I use the USB-C port to charge my Venture 75, as well as multiple other power banks without issue. All of those draw 20w in full sun consistently (I have an inline monitor to check).


Any ideas why I"d have this issue?

Answers