2017 MB Sprinter - YETILINK VEHICLE INTEGRATION KIT?

CODiscoII
CODiscoII Member Posts: 1 ✭✭
in VEHICLE INTEGRATION

I have a 2017 MB Sprinter with a GZ YETI 1400 connected with a YetiLink.

The YETI 1400 fan runs constantly even when full with zero draw and the engine not running. When I unplug the YetiLink the fan goes off.

I recently replaced the battery and my brand new battery was nearly dead when I started the vehicle today. It appears that the YetiLink is constantly pulling from the battery even when the vehicle isn't running.

How can I test to identify the problem? The YETI 1400, YetiLink or if the problem is in the vehicle?

· Share on FacebookShare on Twitter

Answers

  • Zion_Curtain
    Zion_Curtain Member Posts: 155 ✭✭✭

    @CODiscoII

    Make sure that the Yeti Link is set to car mode. If it is left in tank mode it will continue to pull from the car battery when the car is off.

    Switching between modes: press the small reset type button 4 times slowly. See attached photo. Reset button is in the white box. The lights on the tank level will react.

    Screen Shot 2022-10-13 at 8.51.41 PM.png


    Car Mode: Lights blink together

    Tank Mode: Lights scroll from button up

    · Share on FacebookShare on Twitter

Categories