No power to panel
Hello there! I have a Yeti 3000 power station that I inherited with a skoolie, so I know very little about it or how everything is wired. Previous owner wired up a 12 volt panel with toggle switches, USB and 12V outlet and it was working, then just stopped. It appears that there is no power to it. It's connected to one of the 12V hex inputs on the power station. Is it possible that the cable itself has gone bad? If so-what is that cable called-I don't seem to be able to find a replacement on the website. I've attached photos for reference-everything seems to be connected to the back of the panel-I checked the fuses in the red holder.
Thank you!
Answers
-
Hi @Nomad_Realtor58,
That hex connection is our 6mm 12V output. This is a proprietary connection for our Yeti power station. The only cable we currently have available that may replace the cable you mentioned in your picture is linked below.