YETI Link expansion Module
Mike_5820
Member Posts: 1 ✭✭
in ASK ANYTHING
I have the Yeti Link installed on my 1400 and 2 expansion batteries attached. It is plugged into the wall. The input light is on and only one green light is lit. It is not blinking, so am I to infer that it is not charging. Any suggestions
Answers
-
Did you check the 1400 battery level prior to attaching the expansion batteries? If it is not at 100% and the only charging power is the Link, it will charge the 1400 battery first, then the Tanks. You might - just for giggles - disconnect the Tanks and ensure the 1400 is not charging - i.e. at 100%.