Run 12V A/C Unit (Velit) on Goal Zero Yeti 6000x ?

AlexP

The velit operating current says it's between 20A and 60A, the goal zero yeti has a total of 30 + 30 + 10 + 10 + 13 = 93A of combined 12V output currents.

I see that you can combine the outputs into one high current: https://www.goalzero.com/products/12v-max-current-cable

But it still seems limited to 40A (and not 93A or even 60A) and on the cable it says not for Yeti X Power Stations (which I am assuming the 6000x is).

Can the output be combined another fashion (safely) ? Any ideas ? I know I could run 120V AC, but I'd rather avoid if I can.

edit: forgot there was a 2nd 30A 12V output at the top.

AlexP

Could I be using this to combine the 2 HPP 30A output ?

https://www.amazon.com/Victron-Argo-Diode-Battery-Combiner/dp/B01F713B7A/ref%3Dsr_1_4?hvadid=409942941357&hvdev=c&hvlocphy=9028818&hvnetw=g&hvqmt=b&hvrand=18032740416562031965&hvtargid=kwd-117164317&hydadcr=24659_11410797&keywords=battery%2Bcombiner&qid=1687811888&sr=8-4&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&th=1

But isn't that over kill... because I can only assume that in the background the power of the 2 30A port is really just the same... and there should be no need for fancy voltage calibration for the output ?

AlexP

Or this from Goal Zero: https://www.goalzero.com/collections/all-products/products/4x-high-power-port-combiner-to-high-power-port-connector

They do mention in the description "Used to safely combine two or more power sources or solar panels with High Power Port (HPP)". By multiple power source, I can only imagine that mean different battery banks... but thoughts ?