Using Haven 10 with two Yeti 6000X
Can I use a 30A generator adapter with two 15A standard input plugs to connect to the New Haven 10? Something like the below:
Thanks!
Comments
-
...My goal is to tie the two generators together since they can not be chained to eachother
-
...In short, is there an easy way around the in/out phase issue?
-
Since both the AC output ports on the 6000X are in parallel, you can only get 15A total.
You can still connect the 6000X to the Haven 10 with an adapter similar to that one, you just don't need the double 5-15 plugs.
Here is one that is single. I bought a 10 foot extension since the adapter is short. This adapter combines X and Y so you can only do single pole breakers at 120V but it will allow you to cover up to 10 circuits if you keep the current under the 6000X max!
https://www.amazon.com/gp/product/B07Q42XPZT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
https://www.amazon.com/gp/product/B0B1CV1FXJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
-
Only the new Yeti 4000 is able to have multi inverter stacking via its Power+ port. I would not recommend trying to run a 240V load on two 6000X like that since they can't sync ac waveforms.
