YETI 500X USB PD Port Not use PD Device
Kazy
Member Posts: 1 ✭
It is possible to charge with 5V devices and cables that do not support PD, but it is not possible to charge with 12V or 15V PD.
Confirmed that it is a Verson 118 with Firmware
The PD cable is confirmed with several proven PD kale including Thunderbult4
It has been confirmed that it is about 15V 23W on the PC to be charged and 60W or less on the USB monitor
Comments
-
Hi @Kazy,
You can charge the Yeti 500X through the PD port using a USB-A to C cable. It will be a vary slow charge but it will work.