-
Do you have a dealer program?
-
Yeti Link Integration Kit
Can the Link vehicle integration kit be used with the auxiliary battery located under the passenger's seat of a 2006 Sprinter? This battery was used to power a 1500W inverter when needed for use when the vehicle was turned off. I've removed the inverter. The main truck battery is located under the hood and the 12' power…
-
Shipping products for repair
I thought I was doing the right thing by shipping my Yeti for warranty repair/replacement in the protective Yeti case that I had purchased for it. However, when I received a new battery yesterday, it came without the case I had shipped my battery in. Will I get my case back or is it gone, gone, gone?
-
6mm to USB Connector from Light Life 350 to Sherpa 1000pd
How do I get the USB to 6mm connector to be able to power the Light Life 350 from a Sherpa power pack?
-
charging optmization of venture 35
what's the best method for maximizing the useful life of these batteries? I understand that there are particular charging patterns that are better than others - initial charging to full and then up to 80% thereafter (like the EV cars). Does any of these have an appreciable effect on battery life long term? If so, what's…
-
yeti core 1000 intermittent charging
Hi, My yeti core 1000 does not constantly charge with the included 120w power supply. Charges for 2 sec, stops, charges for 2 secs, etc. The display also only shows a 20w input when it does charge
-
Nomad 10 direct to iPad?
To keep charging my iPad while cycling, can I use a Nomad 10 directly wired to my iPad (version: iPadOS 16.3.1) with its 10,050mAh battery?
-
Can I order a replacement charger for my Guide10 battery pack and also the cord to charge solar?
-
Sherpa 100 stopped charging.
Was working and charging fine until last week. The AC power cord lights green and I have tried several different outlets. Nothing at all on the display screen. The small light comes on but that's probably the only remaining power. There is not a fuse warning. What can I do now?
-
Can I hook up a yeti to my existing solar panels or do I have to use the goal zero panels?
-
What happens when a Yeti 1500 reaches 104°F?
I need to use my Yeti 1500 in a hot place that routinely reaches more than 104°F. What happens if it does? I assume there is some kind of safety mechanism in place that will shut it down? or is the 32-104°F more of just a guideline? If it's just a guideline, is there a threshold that will trigger it to shut down?
-
Boulder Briefcase 200 Watt
Is it possible for 4 of these units to be wired in series and connected to a Victron 150/100 smart solar charge controller? This will be used to charge my RV batteries.
-
1500X to Roof of FJ Cruiser
So I have a 1500X GZ and want to bring power to the roof tent. I can wire anything, that's not a problem, but outside of splicing wires to get me there, does anyone have anything in terms of COTS that they can recommend to go from the USB A/USB C on the GZ to a female plug outside under the tent . . . .Anything is open . .…
-
Do you plan to integrate sodium ion batteries also?
With the articles I've read so far - Sodium Ion batteries are beginning to be manufactured in larger quantities for medium and large scale applications, they're cheaper, environmentally better to "mine" the resources for, etc. - Do you see Goal Zero testing and developing the Yetis on that, the Sodium Ion batteries? I…
-
Cargador Portátil Sherpa 100AC
Hola, Mi cargador al encender el modulo de carga AC se apaga. Que puede ser?? Saludos Koke
-
Broken Charge Wire in Boulder 100 Briefcase
The charge wire that connects from the charging box on the back of my Boulder 100 Briefcase broke. I tried splicing it to no avail. I was wondering if there is a way to reconnect the cable to the charging box on the back of the solar panels in order to charge my battery. Goal Zero tells me that the panels are made in China…
-
Yeti150
I had a battery go bad in my goal zero yeti 150. Replaced the battery. Now it goes from full to drained in a day. Why?
-
The plastic cases of my lamp is going sticky
Hi, can anyone help please. The plastic case of my Goal Zero Lighthouse has gone all sticky. Can anyone please tell me why. It is awful to touch as the stickiness gets on your hands.
-
Available Solar Panels for my Yeti 150
It appears all the panels are discontinued for this early model. What are my options now? Would like a flexible 100 watt panel if available .
-
Regarding Yeti1000X
I have a Yeti100X that is plugged in but is not charging. It is at 47%. I have tried unplugging and plugging back in. It is in an unheated garage that is about 40* F. It was purchased 8/22 from Costco. What should I do?
-
Research. Anyone know if the x1500 is compatible with lensun flexible solar panels?
-
Can these power stations be charged by a windmill?
-
YETI Link expansion Module
I have the Yeti Link installed on my 1400 and 2 expansion batteries attached. It is plugged into the wall. The input light is on and only one green light is lit. It is not blinking, so am I to infer that it is not charging. Any suggestions
-
The Little Things
Haven’t tried the product yet, but made two orders. First concern is that I received FedEx tracking numbers linked to the UPS tracking system on both orders. Second concern is I ordered a package with 2 Boulder suitcases. A package with no way to link the two solar units just seems cheap. Hence the second order. If the…
-
Where can I get a manual or instructions for the 1250?
I havent used my 1250 yet and have lost a lot of pieces. Especially the manual or instructions. I also want to get a charger for home outlet.
-
AGM to Lithium Battery
I have a Goal Zero Yeti 1250 and would like to remove the AGM battery I am currently using and eventually replace it with a Lithium battery. Is this plug and play as long as the battery fits inside and can I also use the daisy chain feature and add a second lithium battery.
-
Yeti Link update to firmware 1.8.4
Hi, i have a Yeti 1500x installed in our cam-ervan with a Yeti Link and a B-to-B charging option. I have just updated the firmware to 1.8.4. The battery/tank lights keep burning, even when I am in CAR mode. This gives a lot of green night during the night Is there a way/trick to switch the green lights off? Eric
-
Yeti Link & Lithium Battery - Why Not?
I have extra GZ EC8 to ring cables, so physically, I could easily connect a lithium battery to the link that's installed in my 1500X. Something I often do with extra AGM & other deep cycle batteries I have sitting around. So, what is it about the Yeti Link design or circuitry that prohibits the use of a lithium battery in…
-
How to get a new (<1year old) Yeti 200X's MPPT input fixed.
I bought a Yeti 200X from REI in July of 2022, and it worked at first, but today (Jan 28, 2022) it would charge form neither my Nomad 50 solar panel, wall adapter, nor from a third party solar panel regulated to output 19V. How would I go about getting this fixed. Do I need to do a warranty claim, and if so, how do I go…
-
Beware YETILINK EXPANSION MODULE melted plug and expansion module!
version 2 melted plug and expansion module. version 1 was recalled for this exact reason. brand new yeti 1500x with the YETILINK EXPANSION MODULE + 1Yeti Tank Expansion Battery + 30-AMP EXTERNAL MPPT the battery is being charged by panels through the mppt and then the battery feeds into the yet1500x via the expansion…