-
Continuous Perpetual Power
Duh!?!? Why has nobody figured the obvious solution? Why not just plug your AC Charger into the AC inverter Outlet of your Yeti 3000x and then just plug the DC output of the charger into the charger input of the Yeti 3000x??? Hmmm? Yup, I am smart like that! So smart I must slap myself silly! ROTFLMAO! Ha! Smart Asinine…
-
green light on old shepra 100 button
hi. does any9ne know what d9es green loght on old shepra 100 button means? bought it 7 years ago. few week ago it went on little crazy mode. screen turned on sometime, could not turn it off,could not turn it on. now it ocured to me to unplug and plig back a fuse (have changes it once 3 years ago) and cant turn it off. usb…
-
Yeti 500X 60w USB-C PD (power delivery port) issue
Does anyone experienced the issue with 500X 60w USB-C PD (power delivery port)? On the front left side. This port working only as input. It's impossible to charge USB-C equipped devices using this port. Another USB-C port (declared as 18W) doen't deliver this power to charging units. WTF. Based on several reviews - this is…
-
Car charger
I have a 500x my GZ car charger will not charge higher than 60 watts on either 5 amp or 10 amp setting. Have tried connected to car cigarette lighter at idle and driving. Also tried with car charger directly connected to a charged 12 V battery. Also tried with 500x at 73% charge and 90% charge to rule out stadium effect.…
-
Yeti 1250 AC inverter outlets not working
Hey, I haven’t used my yeti for a while and the battery died. I put a new battery in and everything is working fine except the AC outlets. Anyone else had this problem? All the 12v outlets work great, as do the inputs. and don’t worry, I’ve made sure the AC invert button is on. Please help! I don’t use the AC 240v outlets…
-
replacement part search female receptor for lights
I cannot find this part anywhere . Can someone please point me in the right direction. it's the receptor to plug in my goal zero light into the battery
-
Yeti 200X and Dremel 4300
I have a Dremel 4300 and was thinking of purchasing the Yeti 200X during the sale. Besides all of the benefit uses it mentions, I would also like to be able to power for short periods my Dremel 4300. Any downside to this combination? I like the idea of the portability and weight for carrying to and from where I want to use…
-
Vinegar OK to clean solar panel?
I use my solar panels at Burning Man and they get covered with alkaline dust. I clean them with a little bit of water, but what would work better is if I added some vinegar to the water. But I've been hesitant to do that. Is vinegar OK to clean them with?
-
New out of box Sherpa 100 AC screen died
My last Sherpa 100 AC finally died after almost 4 years of continuous use and accompanying me all over the world. i bought 3 at the same time so I just went to the second one, cut the seals and opened the box. I plugged it into a Anker USCC PD charger and screen came on and showed the normal charge info. I walk away for…
-
Yeti 500 SLA, 12 volt output?
I have a GZ 500 SLA and was wondering if it had a 12 volt dc output other than the crappy 12 volt socket?
-
Goal Zero 1500 with Link
So recently I added the link and two of the goal zero tanks to my 1500 and love the way it works. Previously (with just the 1500) I was charging it with the 600 watt 120v charger using a generator. With the link came a 120 watt charger to plug into the link which works fine but is, of course, much slower. Two questions....…
-
Mounting Boulder 100 to RAV4
I have a 2020 RAV4. I also have a Yeti1500x and 3 x 100 Boulder solar panels. These Boulders are huge! Can I mount 2 or just one? Should I have a professional do it? Just using Boulder (s) to charge my Yeti. No idea what to do, where to start...3 Boulders are too big to carry around and set up by myself when I go camping,…
-
Buying
I live in Israel and I want to buy your products but not from the local supplier because it is expensive. Is it possible to buy from you and make a personal import?
-
Is there any advantage in using a Nomad 50 over a Nomad 20 when charging a Sherpa 100PD?
-
GZ 3000x Webasto
What do I need to hook up my Webasto gas heater to the 3000x? Can I use my DC out from my fuse box set up? Or does it have to be the 12v?
-
Yeti 200X Port problem
Hi, I have a problem with Yeti 200X (EU version). The station is not covered by warranty. The AC output is not working, however the LED is white. There is also problem with USB-A output, it only charge some devices, but not all of them. I tried to make a restart by push and hold 12V and AC buttons for 15 seconds, but there…
-
Charging Omni 20+ 20000mah Laptop Power Bank Portable Charger with Goal Zero Nomad 7 plus (USB A)
I have a Goal Zero Nomad 7 Plus solar panel charger. It only has a USB A (female) output. I just purchased a Omni 20+ 20000mah . Although the Omni 20+ has USB A ports, only the USB C ports (and the DC port) on the Omni 20+ can be used for input/charging. If I get a USB A to USB C adapter will I be able to charge my Omni…
-
Off the grid barn
I have: yeti 3000 & (4) Nomad panels; no accessories yet. i have an off the grid barn that has no wring yet. My idea was to leave the yeti in the barn to power a couple LED lights, trickle charger for motor toys, and maybe a few tools for time to time. I'd like to wire it to a few solar panels permanently mounted on the…
-
Yeti 1000 Lithium fans always on!
I have a yeti 1000 Lithium that has no display, no response from controls but fans are on. any idea what is wrong with it?
-
Yeti 400
I have a problem with where the power plugs in? Sometimes if I twist and pull the blue light comes on and it starts charging. I think the the socket is worn sometimes it sparks ⚡️ can this be replaced?
-
How to determine run time of a CPAP device on YETI1000
I have a Phillips Dreamstation II with a draw of 6.67 amps at 12 volts. Instead of using the supplied 110 volt transformer, I have a 12 volt cable for it. How do I compute how many days this power station will run the CPAP without recharging? I am planning on camping for 4 days and will not be using the power station for…
-
Light red on 12V output port?
The LeD on my 3000X 12V output port turned red. After pulling all input and output cables I tried: Pushing the 12V button to reset per manual: went white and immediatel red again Reset button inside the cover of the Yeti below the WIFI button: No change Pressing the Unit and Light buttons simultaneously: No change…
-
Yeti 500 - Hot water kettle
Any issues/limits on plugging a hot water kettle to get boiling water?
-
Solar panel for Sherpa 100AC (new)
Hey guys I’m looking into buying a Sherpa 100AC new version and I have a nomad 7 solar panel. will I be able to recharge the power bank? does this make any sense? Or the panel is just to small. I will be going to a place up in the north with sun day and night … take into consideration please hehe…
-
Is the blue input light supposed to blink during charging?
-
100 boulder briefcase with boulder 100
Hi, can I connect my Boulder 100 briefcase to a Boulder 100? (using the Anderson combiner). I have a Yeti 1000. Thanks
-
What model can handle a blower for a inflatable movie screen?
I'm a novice with power draw, I need a model that can handle a blower for an inflatable movie screen for 4+ hours. The label on the blower (xpower Model BR-252A) I own reads Rating: 120V, 60HZ, 9.8A
-
Yeti 500x Solar Panel Compatibility (Output Specs)
When looking for a solar panel, is VOC or VMP the measure of the max input for the Yeti 500x? Would this solar panel work for the Yeti 500x with an 8mm adapter cable?https://hqsolarpower.com/100-watt-12-volt-monocrystalline-solar-panel-compact-design/
-
Slow charging on my 3000x..wow
I have multiple YETIs in our home(s) I have a 3000x that will not charge at a rate higher than 50 watts. The battery was at 50% charge after a recent drawdown. I put my 240 watt charger on it and it ramped up to 240watts, but quickly dropped to 50 and remained there. I tried my new 600watt charger and it did exactly the…
-
Yeti 400 with 2 chained 100 boulder panels
Are there any issues with just chaining two 100 watt boulder panels together to power a Yeti 400? Thanks