-
Mounting Boulder 100 to RAV4
I have a 2020 RAV4. I also have a Yeti1500x and 3 x 100 Boulder solar panels. These Boulders are huge! Can I mount 2 or just one? Should I have a professional do it? Just using Boulder (s) to charge my Yeti. No idea what to do, where to start...3 Boulders are too big to carry around and set up by myself when I go camping,…
-
Buying
I live in Israel and I want to buy your products but not from the local supplier because it is expensive. Is it possible to buy from you and make a personal import?
-
Is there any advantage in using a Nomad 50 over a Nomad 20 when charging a Sherpa 100PD?
-
GZ 3000x Webasto
What do I need to hook up my Webasto gas heater to the 3000x? Can I use my DC out from my fuse box set up? Or does it have to be the 12v?
-
Charging Omni 20+ 20000mah Laptop Power Bank Portable Charger with Goal Zero Nomad 7 plus (USB A)
I have a Goal Zero Nomad 7 Plus solar panel charger. It only has a USB A (female) output. I just purchased a Omni 20+ 20000mah . Although the Omni 20+ has USB A ports, only the USB C ports (and the DC port) on the Omni 20+ can be used for input/charging. If I get a USB A to USB C adapter will I be able to charge my Omni…
-
Off the grid barn
I have: yeti 3000 & (4) Nomad panels; no accessories yet. i have an off the grid barn that has no wring yet. My idea was to leave the yeti in the barn to power a couple LED lights, trickle charger for motor toys, and maybe a few tools for time to time. I'd like to wire it to a few solar panels permanently mounted on the…
-
Yeti 1000 Lithium fans always on!
I have a yeti 1000 Lithium that has no display, no response from controls but fans are on. any idea what is wrong with it?
-
Yeti 400
I have a problem with where the power plugs in? Sometimes if I twist and pull the blue light comes on and it starts charging. I think the the socket is worn sometimes it sparks ⚡️ can this be replaced?
-
How to determine run time of a CPAP device on YETI1000
I have a Phillips Dreamstation II with a draw of 6.67 amps at 12 volts. Instead of using the supplied 110 volt transformer, I have a 12 volt cable for it. How do I compute how many days this power station will run the CPAP without recharging? I am planning on camping for 4 days and will not be using the power station for…
-
Light red on 12V output port?
The LeD on my 3000X 12V output port turned red. After pulling all input and output cables I tried: Pushing the 12V button to reset per manual: went white and immediatel red again Reset button inside the cover of the Yeti below the WIFI button: No change Pressing the Unit and Light buttons simultaneously: No change…
-
Yeti 500 - Hot water kettle
Any issues/limits on plugging a hot water kettle to get boiling water?
-
Solar panel for Sherpa 100AC (new)
Hey guys I’m looking into buying a Sherpa 100AC new version and I have a nomad 7 solar panel. will I be able to recharge the power bank? does this make any sense? Or the panel is just to small. I will be going to a place up in the north with sun day and night … take into consideration please hehe…
-
Jackery Solar Panel (100w 18v) to charge a 12v lithium battery
I'd like to employ an existing solar panel which I have (Jackery Solar 100w 18v) to charge a 12v lithium (non Jackery) battery. Battery input is SAE. I'm guessing I need a 100w charge controller and and SAE cable adapter
-
Is the blue input light supposed to blink during charging?
-
100 boulder briefcase with boulder 100
Hi, can I connect my Boulder 100 briefcase to a Boulder 100? (using the Anderson combiner). I have a Yeti 1000. Thanks
-
Sherpa 100 AC 4th gen - No data displayed on screen
I am trying to figure out if there is some sort of (magic) reset I can do or how to troubleshoot the screen not working on my brand new (4th gen) Sherpa 100 AC. I have had it charging on several different charges for several hours, but the display did not come on. I do see the lights on when pressing the USB and AC buttons…
-
Sherpa 100 not working?
Several years ago I was given a new Sherpa 100. I fully charged it, but it was never used. Several times a year I charged it, but it was never "dead". Now I would like to use it. I charged it up again, and the little battery indicator showed that it was charged, but it didn't hold the charge and is now dead. I plugged the…
-
What model can handle a blower for a inflatable movie screen?
I'm a novice with power draw, I need a model that can handle a blower for an inflatable movie screen for 4+ hours. The label on the blower (xpower Model BR-252A) I own reads Rating: 120V, 60HZ, 9.8A
-
Yeti 500x Solar Panel Compatibility (Output Specs)
When looking for a solar panel, is VOC or VMP the measure of the max input for the Yeti 500x? Would this solar panel work for the Yeti 500x with an 8mm adapter cable?https://hqsolarpower.com/100-watt-12-volt-monocrystalline-solar-panel-compact-design/
-
Slow charging on my 3000x..wow
I have multiple YETIs in our home(s) I have a 3000x that will not charge at a rate higher than 50 watts. The battery was at 50% charge after a recent drawdown. I put my 240 watt charger on it and it ramped up to 240watts, but quickly dropped to 50 and remained there. I tried my new 600watt charger and it did exactly the…
-
Yeti 400 with 2 chained 100 boulder panels
Are there any issues with just chaining two 100 watt boulder panels together to power a Yeti 400? Thanks
-
Sherpa 100AC - QI charger not working after 4 months
i've loved this so far until a couple weeks ago i noticed my iPhone SE (3rd Gen) wasn't fully charged when i left the house. i always leave it laying flat on the QI charger ( yes with the button ON). recently every morning the phone shows -30-60% charge. now i have to plug it in using a cord which is the hassle that the…
-
Charge Controller on Core
Camper with a 12v, 130AH AGM battery. The Boulder 100 panel has a charge controller. I attached the 10 amp connectors to the AGM battery terminals. Is it possible to send 12v from my Yeti 1000 Core to the charge controller and re-charge the AGM battery using the Core ? The connectors on the Core are not those used as 10…
-
Brand New Out of the Box SHERPA 100AC Weird Behavior
Hi Friends: I just received my SHERPA 100 AC Yesterday, and it came out of the box indicating a 100 % charge. I wanted to get an idea of the built in Solar charging capability, so I plugged in my Elecaenta 120 Watt solar panel. However, it was also a very cloudy day, yet I was happily charging the unit @ 5 Watts 😃👍. I…
-
How can I determine the right GoalZero product?
I am hosting an outdoor event where there is no power. I need to provide power for three food heating lamps, DJ Sound equipment and string LED lights. Can this be powered for 4 hours using a GoalZero Power Station? If yes, which model.
-
Yeti phase coupling and safety grounding
I am considering getting two (or more) Yeti1000 for powering a live stage. Is there a way to slave the inverter of one Yeti to the other so the electricity from both is in phase? For sound amplification, it is important that the phase of power sources be the same. e.g. the power for all guitar amps and the power for the…
-
Yeti 1500X Input on top of box
I just purchased a Yeti 1500x. When I connet my 12 volt charger to the input on front of device, it charges properly. When opening the lid and connecting input to top port, I get nothing. Ironically, when conected to the front port and device is charging, the blue lights on each port flash. Am I missing something? I cannot…
-
Torch 500 not working
My torch 500 has been working fine. Today I tried to use the light and it will not turn on. It sits in my window sill, so it has plenty of sun. I also have the torch 250, which is old , but it still works fine. What happened?
-
Shipping?
Can anyone tell me if Goalzero ship to the UK directly please? I can't find a contact to ask Goalzero directly. Many thanks. 😁
-
nomad 20
Hi, can i link a nomad 20 with a nomad 13.5?