-
Problem Charging Yeti from Foldable Nomad 100W Panel
Yeti 1400W stopped acknowledging solar input Via the 8mm Connector from Nomad 100w Foldable panel .Could not get a reading using a Multi meter so bought a new connector MC4 to 8mm. Getting a reading with multi meter of 19.6 V but nothing registers as input and no charge occurs. The Yeti does accept AC charge. Please help.
-
combining boulder 200 with nomad 200
ccan I plug the boulder 200 and the Nomad 200 into both inputs on the generator...or do I need the combiner?
-
GZ 1500x issue - no solar input
Hiya, Our 1500x is not acknowledging solar input. Via multimeter, over 20 volts are coming in but nothing registers as input and no charge occurs. The GZ does accept AC charge. I have done multiple resets but no change occurs. Wiggling the input wire doesn’t change anything and I don’t know what else to do. Please help.
-
Yeti 500X+wattstunde 140W
Hello, is it possible to use the solar panel from Wattstunde 140W to charge the Yeti 500X. Thank you for your feedback.
-
Can I use a Nomad 200 with Yeti 500x?
If so, how, and what do I need to connect and make sure I don’t overcharge the Yeti 500x? The specs for 500x says max input of 180 watts but also shows charging time for a Boulder 200 at 3-4.5 hours. So can I use the Nomad 200 to charge the Yeti 500x and if so, how? Thx
-
8mm female plug?
I want to take my Goal Zero solar panel and use it to trickle charge my car batteries. However, I need an 8mm female plug. Goal Zero doesn't seem to sell them. Is there something available on Amazon? I tried to buy such a thing from Amazon, and I got the wrong part. Thanks In Advance.
-
Unplugging inputs during charge
Is it damaging to either my Yeti 1400 or the solar panels to unplug them while they are charging ??
-
Older Boulder 30 briefcase
We have an older Boulder briefcase. I am trying to find out what kind of connector this has. We purchased a small new goal zero phone power bank and wanted to find out if there is a way to adapt this to be able to charge it with our older solar panel. The flip 24 only has a usb connector. The connector on the panel looks…
-
How do it clean or recondition the plastic on my Nomad 100 panel?
3 out of 4 of the segments on my Nomad 100 have become very fogged. I haven't used any abrasives cleaning it, just some dawn and a sponge followed by a rinse. Is there a better way to clean them up? Output has gotten much lower over the years too. Only about 40w on my Yeti 1000 via the mppt on full sun at solar noon.
-
Boulder 200 briefcase chained with boulder 100 briefcase?
I have a yeti1500x and (1) Boulder200 briefcase. My wife and I live on the road and use it regularly and just 1 boulder200 hasn't been enough to keep up. We've hit a spell of bad weather and clouds making the charge slower. However we were gifted a boulder100 briefcase. It's an 8mm port and the boulder 200 is a high port…
-
Cable through van roof to connect Briefcase 200a panels to Yeti 1500
I can't find a cable gland large enough to accomodate the connectors on the end of the cable. Do I have to splice the cable to pass through the van roof? Any advice would be appreciated. Thanks; Gary
-
Charging Sherpa 100 PD from Nomad 20
If I chain 2 Nomad 20's together to recharge my Sherpa 100PD, does that increase (double) the rate of charge?
-
Boulder 90 solar panel
I have a brand new Boulder 90 solar panel… how long does it need to set in sunlight before it will actually provide power to my Yeti 1400
-
What voltage do the panels operate?
I know the panels collect different amounts of energy (Watts), but what voltage levels do they operate? I know Watts = Volts x Amps, so this will help me understand the different electrical variables involved. Why would the solar panels operate at different voltages?
-
Charge controller or not
I bought a 8mm blue ring to SAE cable. It has a tag on it saying to make sure i have a charge controller between the solar panel and the battery. If i have a GZ yeti and a GZ solar panel. Do I need an inline charge controller?
-
Do I need an adapter from my Nomad200 to charge my Yeti 500X?
How do I connect my Nomad200 to my Yeti 500 X? Am I missing a part?
-
connect a goal zero to Zamp solar pannel;
I have a lightly used Zamp 140 watt solar briefcase with charge controller. I recently purchased a goal zero 1000 and would like to use the panels to charge but not sure if there is a workaround or way to safely bypass as the goal zero has charge controller as well? There is no quick disconnect for charge controller on…
-
Solar Charge with HPP and 2x 8mm question
Over the past year I have been charging the Yeti 3000x with two 320w panels on the roof, using a combiner cable and life has been perfect, maxed out at 550w of input on a great day of sun. I wanted to max out the Yeti and Installed two 225w panels each running the Yeti with an 8mm 30 ft extension. I figured after power…
-
Controller for Nomad 200
I recently purchased a Nomad 200 to pair with a Solar on the Side plug for my camp trailer. I'm now realizing I need a controller as part of the hook-up. Which controller would you recommend?
-
Input solar power into Yeti 6000x via car link?
Hi, I have a yeti 6000x with the Yeti car link. Do I need a separate mppt controller to input power from 2 x 100w Boulder solar panels into the 8mm input on the Yeti Car Link? Or is energy input into that port managed by the internal mppt controller in the Yeti 6000x? I understand that by inputting solar energy into the…
-
Connecting Boulder 200 Panels to an Inverter in an FJ80
I'm a huge fan and long time supporter of multiple GoalZero devices that I routinely use camping and overlanding. I have an FJ80 Land Cruiser that has an onboard inverter with a secondary battery to help power devices while offgrid. While I've used both by Boulder 200 and Yeti 500X to supplement power individually, I've…
-
connecting two yeti 400's
If I use the chaining port between two Yeti 400's and the first yeti is connected to a power source, by chaining the two, will the second (without a power connector) yeti get charged OR do I also need it to be powered to source as well?
-
Limits / guidelines on cable length -- solar panels
I currently have the standard 4-way splitter and a 35' cable to bring power from my 3 Boulder 200's. Chasing the winter sun, it appears as if moving the panels onto some dormant raised beds further from the house would be necessary, and the 35' cable likely won't quite cut it (my Yeti is in a climate controlled cellar and…
-
New portable solar
We have a diesel mobile generator company and I want to replace some of the generators with mobile solar energy. How can you help me in this field? Please send all the details to my email falconone717@gmail.com
-
Can I salvage one Boulder suitcase panel if the other was detroyed?
One of my Boulder panels was run over and destroyed (don't ask) by a truck. The other seems to be fine. I have to believe that I can salvage the remaining panel, but wanted to check to see if anyone has successfully done this and what is involved. TIA.
-
1220w power inverter --> Yeti 400
I am installing a 12v 400w solar kit (4-100w panels) to my trailer. There is a 1200w power inverted that provides a 110v plug. Can I plug the 8mm power adapter to the 110v plug to charge the Yeti 400?
-
How to connect two Boulder 100 to Yeti 500X?
Hi there, I just bought a second Boulder 100 to improve the charging of my Yeti 500X. I read somewhere that a 4x8mm to High Power Port Cable is necessary to chain the two panels together - but my Yeti does not have an Anderson plug socket. How should I connect that cable to the power station? Or did I missunderstand…
-
Backpacking with Nomad 14
I need to charge Medistrom Pilot-24 battery (24 v 2.5A, discharging 3550mAh) battery in 4 hours or less while backpacking through the forest. Can I use the Nomad 14? What is the best choice?
-
YETI 3000X
Hello, I need to connect 3 solar panels of 175W, 50v. I would like to know if I can keep the Yeti X 600W power supply connected in the same moment of the solar panels so I can alternate between them when I have to charge the Yeti 3000X.
-
Help! Chaining Dissimilar Solar Panels
Please help! I have a Ranger 300 briefcase, and a Boulder 100 briefcase. I'd like to use them together to charge my Yeti 3000X. Is that possible, and how would I connect them to have both of them charge my Yeti? Thanks!