-
Lithium 400 does not turn on but links once
When I plug in the charger I get a short blink on the display and on the input led. But then it goes dark. Reset doesn't help. I am going to try a different charger any other suggestions?
-
My yeti 3000x has 0% charge. I have it plugged into the wall outlet. What could be the problem?
-
Yeti 1000X + Yeti link + Tank
Hi! just installed a yeti link and tank with my Yeti 1000X. Since the yeti link has it's own input for the tank, can I plug the 8mm charger to it and an Anderson from my two boulder 100's to the Yeti itself at the same time? Thanks
-
No power to panel
Hello there! I have a Yeti 3000 power station that I inherited with a skoolie, so I know very little about it or how everything is wired. Previous owner wired up a 12 volt panel with toggle switches, USB and 12V outlet and it was working, then just stopped. It appears that there is no power to it. It's connected to one of…
-
Goal Zero Tank Expansion Battery Hack
I have added a Victron Smart Battery Protect to the tank 12v 100ah AGM Battery. Goal Zero told me that the AGM battery in the tank could be drained to zero no problem. If you are running devices off the Yeti and the demand is there the Yeti will run the Tank and the Yeti all the way down to 0. You can set a cutoff voltage…
-
SOLAR PANEL NOMAD 50
can I use a NOMAD 50 solar panel on a coal zero 150 gen.
-
Yeti 1500x and Tank Battery questions
just installed 1 tank battery on my yeti1500x with the 30a solar charger. everything works as expected. Questions: the yeti usually draws 150amps (output) but when it is charging from the tank this goes up to 220amps. whats going on here? will the tank battery stop charging the yeti when its capacity reaches 50% which is…
-
Is there a replacement battery for the Goal Zero Yeti 1250 Solar Generator
I noticed my battery and my second battery are not charging. I had both for over 3 years and it is most likely time to change them.
-
Adding capacity in my van with yeti 1000
I have a yeti 1000 in my van with Yeti link to charge the battery with the alternator. Can i add battery capacity while keeping Yeti link connected to the alternator
-
1500X Unboxing- Comprehensive Owners Review
Really awesome video that breaks down the 1500x! https://www.youtube.com/watch?v=Y4BZE5R6n1Y
-
I have 3 yeti 150
I have no operating instructions. One Duracell battery is replacing badly distorted battery in one unit. None will recharge/work. In need to know how these operate. Or, should I throw them away?
-
Yeti1500 performance in sub 32F/0C temps
I thought I read somewhere that the Yeti doesnt perform well in sub freezing temperatures. It was recommended to buy a protection case. True? Can you still access power when it is in the case? Does the case have vents for the cooling fans? Alternatives to the protective case? Thanks, Brian
-
How long can a 500 operate an appliance that draws 4.5 amps @ 12VDC?
-
Heat
Just completed a 14 day road trip using the core1000 as a power source for our heated blancket and lighting. went well each sunny day supplied the nights need. When the trees blocked solar access, we lasted 4 days with out recharging.
-
Albert Choi
Hi " I got email from yeti , no one carry Yeti 150 lead acid replacement battery and look photo your co email, was connection was different ? Where can boy battery please "
-
Gauge of extension cord for appliances
Own a 1500X and it's too heavy for my husband or I to be moving around. Plan is to keep Yeti in one room and run extension cords to fridge, freezer, etc. Is there a particular gauge of extension cord to use? Thanks in advance.
-
1500x Randonly started resetting 120V outlet
I use my 1500X for my Home Office to protect from grid glitches. This morning the unit started randomly rebooting my power outlet repeatedly whihc dropped my internet and connected devices. I noticed there was a Frmware update. It was a bit of a struggle to get the firmware updated. The firmware update completed and the…
-
Yeti 1000x hang, unresponsive
Hi! I just bought a brand new Yeti 1000x and while charging it with a boulder 100 (and under load powering a computer + display through the 230V socket plus a light via usb) it hanged. The display does not respond, I tried resetting by pressing both the info + units buttons for more than 7 seconds and nothing happens.…
-
Yeti 1500x Sudden Power Dropping down from 100% to 0%
I have randomly had issues with my Yeti 1500x having a 100% charge and still charging with the solar panels, then all of a sudden instant drop down all the way to 0%. In other instances, it would be charging between 65% to 75% and do the same thing dropping all the way back down to zero. Today it has dropped from 90% all…
-
Combination Solar Charging w/ AC backup
I have a Yeti 400 Lithium and a Boulder 100 and am hoping to use this to power an 18W pond aerator, roughly 24x7 (but with 30 minute breaks every 8 hours or so). Even with the breaks, we don't get that much sun in Michigan, so I expect the drain on the Yeti 400 to be enough to deplete it every day. I am looking for a…
-
Yeti 400 and 2 Boulder 30 panels
I have a Yeti 400 I got and 2 Boulder 30 panels that I picked up a few years ago, and I finally decided to take them out of the box. The Yeti seems to work fine, and charges when hooked up to the AC adapter. It is at 80 percent battery right now. When I daisy chain the 2 panels and plug them into the Yeti, it won't charge.…
-
Capacity loss after 2.5 years - Yeti Lithium 1000
Hi I own since January 2020 a Yet Lithium 1000 I'm very happy with. But since a few months it's loading only up to 83% (on it's display). So for me it looks like it has lost 17% of it's capacity in just 2.5 years?? Can that be and is that normal?
-
Yeti 3000 screen went blank faint clicking sound not working
My Yeti 3000 has just failed while on holiday.. the screen went blankand a faint clicking sound started. I have tried resetting the yeti by pressing the 3 buttons it does nothing, I have now taken the top cover of and disconnected the battery, when re connecting the battery it does nothing no lights but a fail clicking…
-
Changing charge profiles with yeti link expansion tanks installed
Is there any way to change the charge profile on the yeti X lines while expansion tanks are being used? i am able to change the profiles on the app but it seems to have no effect and continues to keep the yeti 1500X at 100% while not following the charge profile i assigned. This only happens when the expansion tanks are…
-
How do I get my Yeti 1500X to charge more than 84%
I bought the Yeti 1500X and have charged it using both solar panels and plugging into the outlet. But it will not charge more than 84%. I have tried as suggested - run it down and recharge a few times - but the highest charge it ever gets is 84%. I tried unplugging it and waiting and re-plugging it in, but still stops at…
-
220VAC Split Phase with the Yeti 3000x
We have a well pump we would like to power and ideally do it thru our breaker panel. This would require 220VAC split phase operation. Can the unit be wired for that. Better yet, if I have two units, is there a way to parallel the operation of the two units to get split phase operation? I would create a plug into our…
-
Sherpa 100AC Phantom Input
Good afternoon, My sherpa 100AC seems to be showing a constant 49w input on the p1 port even when nothing is connected, I've tried a reset and that didn't clear it, dies anyone have any idea how to get it to reset?
-
first time use yeti400 lost power immediately
Lost power at home due to severe storms yesterday. Fortunately, had my new (bought 6 mos. Ago), never used yeti charged at 100%. I plugged in 2 phones for a few minutes to make sure it worked, which it did. Still at 100%. Unplugged phones so nothing was plugged into yeti. Got up this morning....60% despite nothing plugged…
-
Yeti Tank Expansion Battery 23100 vs. 23105 V2?
I have four original Yeti Tank Expansion Batteries (SKU 23100) connected to my Yeti 1400 Lithium Portable Power Station with WiFi. A few days ago I ordered two more Yeti Tank Expansion Batteries and when they arrived I noticed the boxes and pack list were labeled with SKU 23105, and the pack list says "V2". What is the…
-
Yeti 6000 and Nomad 200 Panels
I have 3 Nomad 200's connected and input power is only registering 250-350 watts (& 11.7 V) in full sun. Shouldn't the input energy be higher? I've checked the connections and all seem to be good. Thanks