-
Charging in below freezing temps
I have the Goal Zero Yeti 1400 which I leave connected and charging to a Boulder 100 solar panel and a 45 watt Harbor freight solar array. The Yeti powers the lights in my unheated garage. Temperatures in the garage this time of year range from about freezing to 0 F. The GZ site suggests insulating the Yeti in a cooler in…
-
Charge Yeti Goal Zero 3000x from another Goal Zero 6000x???
Hi, is there any way I can charge my goal zero 3000x from another goal zero 6000x??? I have a Goal Zero 6000x connected to my Alternator with Yeti Car Link. And would like to have that 6000x charge my Yeti 3000x. Is there any way? Thanks sooo much for any help!
-
how to change yeti 400 lithium battery?
My Yeti 400 lithium battery needs replacing. I have a new lithium battery. How do I replace the old one with it? Appears to be more complex than I thought and all I find online makes it look easy but does not look like the inside of the 400 lithium.
-
Cracked Display
Is this repairable? I just moved back to the U.S. after being stationed overseas and discovered this.
-
Company trying to investigate setting up a central charging station for 10 - 6000x units.
We are trying to set up a solar charging station for up to 10 - YETI 6000X portable power stations. What panels to use, size of space, any ventilation needed.
-
Why isn't my yeti power link working?
I have plugged wall power (120v), into the link module and the input indicator light turns a solid blue. However the tank indicator is at 1 green light. I charged my yeti 1500x to 100% last night and then moved the charger to the link module. When I check on it this morning, the yeti was at 98% and the tank indicator was…
-
Can I use my Yeti 3000 to do a simple charge of a separate LiPo4 battery?
-
1500x won’t charge
my 1500x is several months old. It will accept a charge forabout 10 minutes. Then light goes solid and no power input. What is going on and how to fix? Also- my USB is outputing power but the DC and AC are NOT. Help!
-
Floor Sander???
Wondering if I can power a walk behind floor sander with my GZ Yeti 3000? When I Googled it I found this... "What size generator do I need to run a floor sander? -- On average, it is going to take a generator of at least 8–10 kW to give you a power hub that most closely resembles what you are already accustomed to when…
-
Troubleshooting yeti 400 lithium
So a thermometer icon appeared on the display, so i unplugged everything and let it cool down overnight. Next morning it was still there. Tried a reboot by pressing& holding the 2 buttons but instead of rebooting it slowly faded out and went black. Now nothing even a week later. Any ideas? And if it needs service it is no…
-
Why does out Solar causes our output to fluctuate.
Hi there, we have found that when we plug in our solar panels into our Yeti 3000x that it sometimes causes our input and output to fluctuate quite a lot. The screenshots were taken from a video a couple seconds apart, I would upload the video but it’s too large. This seems to happen more often when we are getting a larger…
-
Goal Zero Yeti150
I have two of them and they bouth make be-ping sound right after I take them of the charge from wall outlet. I bought them for 200$ each, now I see they are only 100 . what should I do,I know is not wort to repair them but I feel bed to trough them in garbige. Can you help me with idea what to do.
-
Can i connect more than 600w of panels to my yeti 6000x app port rated at 600w?
Id like ask if its ok to series parallel panels beyond the 600w on the yeti 6000x app port (rated 600w). I plan to do parallel 3 sets of 2 140w 7.8A 24v panels. Series 2, 140w, 7.8A, 24v = 280W, 7.8A, 50v Having 3 in parallel gets to, 840w, ~24A, 50V The APP port on the goal yeti 6000 is 600W, 50V, 50A. My thinking is that…
-
Yeti 500x and 400Li have much different output voltages. Why?
My 500x and 400Li have much different output voltages when fully charged. The 500x indicates 13.44v and the 400Li 12.4v, when both measured using two identical dual USB/USB-C car chargers with LED display, rotated between power stations. Am I correct in assuming that the output voltage indicates state of charge (SOC)? If…
-
My Yeti3000x stopped charging!
My Yeti3000x just suddenly stopped charging. I purchased a replacement sherpa charging cord, but it still isnt charging. Any suggestions?
-
How to connect and use with a camper trailer and power for home
I would like to use a Yeti 3000 generator with my camper trailer when we are camping without electrical hookup. I have a cord that plugs into a 120 outlet from my my camper. Is this what I would use to plug into the generator. If I plug into the generator with the camper would I be able to use an oxygen machine throughout…
-
YETIX 600W POWER SUPPLY
The User Guide states: NOTE: Not compatible with Yeti Lead Acid, Yeti Lithium, or the Yeti 200X/500X Power Stations. If a Yeti 1500X has one or more Yeti Tank Expansion (Lead Acid) installed, may the YetiX 600W Power Supply still be connected to the Yeti 1500X for charging?
-
Yeti 1500X, Tank Expansion, 600W Power Supply
Can I attach my 600W Power Supply to my 1500X and AT THE SAME TIME attach the 8mm Power Supply to the Link for charging my Tank and additional AGMs? I know that the 600W cripples the 1500X 8mm ports. However, I assume the 8mm Port on the Link is still powered. I don't have this equipment; only doing research prior to…
-
12v outlet
Good day! We have a Yeti 1000 Core that has been put through a lot and performs flawlessly. My question is this, (though I should already know the answer) can the 12v be expanded? Can all of the 12v options be used at the same time. We currently power a fridge/freezer off the “cig” lighter port. We also have a diesel…
-
Yeti 1500X Battery Replacement
The User Guide states: DO NOT tamper with or attempt to replace your battery. For information about a replacement battery contact the Goal Zero solutions center. What is the procedure when a new battery is required?
-
UK 6000X inverter voltage
Hi Can anyone confirm tha tthe inverter in the UK model of the 6000X is 230V AC? I ask because some suppliers say it is 120V AC but I suspect this is because they have copied the US product information for their websites Thanks
-
YETI 1000X Programing
Hi everyone. tried to find information by my self, but there is empty. I have yeti 1000x, 120w charger, output - 50-100w First problem (where start is) - it was uncharged, but slowly. it was almost 4 weeks, always on charge 120w and output AC 110w maximum. I saw, that every day battery get lower and lower. I try to figure…
-
Yeti 1500x with 4 Boulder 100 charges slowly
I have a Yeti 1500x. I have 4 Boulder 100 panels. I have a High Power Port connection coming from the panels to the yeti. When connecting the solar input, charging from full sun will yield 300+ watts input but only briefly. Even though the panels seem to able to send more watts, the yeti scales down to about 170 watts…
-
Yeti 1000x paired with Harbor freight 100w Thunderbolt solar.
I was just wondering how many of these panels can I connect to my yeti 1000x. I have the MPPT module. I also have the igreedy 10 AWG Solar Connector to SAE and the hpp 4 port connector. The panel has Rated Output 18 VDC / 100 W / 5.56A. Thank you for any help.
-
Yeti 1500x compatability with RV 120v
I have a scamp that runs on 30 amp, but I can swap the plug to connect to a standard 120v. I have the yeti 1500x. Any idea if it would be safe to plug my Camper into the yeti with the 120v plug adapter? Looking to run the max fan and maybe a light or two when off grid. I'm not technical at all (that's why I went with…
-
I have a 25A power supply for the Yeti 3000 (NOT X) that has failed.
It says the output is 13.8V at 25A, but the Yeti says the input can only be between 14 and 22 volts. It also says that you cannot charge the Yeti from a car without using their adapter, because the voltage would be too low. The car adapter raises the voltage to over 15V for charging the Yeti. So can I use a 25A 13.8V…
-
I use a 3000X to power my off grid cabin. When I’m not at the cabin should I leave my generator plug
-
Power a hot tub pump
I have a small inflatable hot tub. Power usage states it's 1300W for the heater and 50W for the fitler. I plan on running it 24hrs with the heat running as needed. Any idea of a Yeti with Solar panels can support this as I don't want to run an extension cord to the pump? If so what size Yeti is recommended?
-
1000 Core Screen coming in...
The screen on my Yeti 1000 Core keeps turning itself on a long with the USB ports?! I turn it off and minutes later it turns back on?! I literally just unboxed this unit this Saturday and I'm hoping there is not an issue already?! Any input or advice would be great. Now I'm a bit nervous about leaving it alone in the house…
-
Question About APP Volt Drop
https://community.goalzero.com/discussion/502/12v-app-volt-drop#latest