-
Solar quit charging
I have a new to me open box Yeti 1500X and am checking it out with my new portable Dometic CFX3 55 Liter fridge. The 110 VAC works consistently for charging but the new Renogy Flexible 100W panel did not. When I first plugged the panel in to the input Anderson PowerPole, it worked great for the first few minutes. Then it…
-
Best Practice for everyday use
I have 1500X. I use it every night to power my CPAP machine in case power goes out. What is charging best practice for this scenario? It is plugged into smart device in my smart home. I can literally charge it or not any time, or condition. ie. Remainig capacity It uses about 20% of the battery every night. It is set on…
-
Yeti 500X will not charge
I let my new 500X un attended for 6 months and recently tried to get it up and running for the season. The display came to life when I plugged it in but is showing 0% (8 volts) and even plugged in, the input power is 0 watts. Is there something I can do to get it back up and running? Mike B
-
1500X MPPT board replacement
Does anyone know where I can get a MPPT board for a 1500X? I got my system used at an REI garage sale, and since you can't really test solar in a store, I didn't know that didn't work till I got it home. Since it was used, it isn't covered by warranty. One of the AC jacks was bad also. I have already tried doing multiple…
-
Overloaded
I have the 3000x. I have been running a sump pump that feeds my greenhouse from a nearby creek. It has been working fine for two weeks now. The sun has been keeping battery well charged. I just went to check on the greenhouse and the a/c button is red and lcd screen reads Overloaded. Is it due to heat in greenhouse? Thank…
-
deleted
-
double charging
Hi I have a goal zero 1250 and am connecting 200w of fixed solar using the anderson connection. My question is while its being charged by that am I able to to charge it additionally with a foldable solar panel using the 8mm connect or even the 12v car charger into the 8mm connect at the same time as my fixed solar
-
Yeti 1400 not working
My Yeti 1400 is not working for my 12v fridge below 60% capacity of the battery. Any idea what to do. Dine the three bottom reset already? thx for answer
-
Firmware update hang / Yeti 3000 (older version, not X) / 1.7.6 to 1.8.6 incomplete
I attempted to update firmware from the app, it got about 43% done, then I noticed later it said update incomplete. It automatically retries every two hours. it has yeti link and is plugged in to power. How can I successfully update, or prevent it from trying/reset?
-
Yeti1000 - Screen Not Working
Hey friends, We've had a good run with our Yeti 1000 Lithium battery, but recently it's been acting up. I'm not super familiar with these things, so reaching out here to see if anyone has any advice. The issue: The battery basically appears dead - no lights when plugged in to charge, the screen doesn't load, the ports…
-
Goal Zero Yeti 3000x
Hello, I want to connect my Goal Zero Yeti 3000x to some solar panels, I see that the ones Yeti sells are more for travel and are more expensive than other brands. I was looking into connecting 2 Renogy 200 watt panels From what I read the yeti is able to support up to 600 watts of input, but will only accept 50v and up to…
-
Yeti 400 overheating
We have had ours for 4 years and really only use it when we camp for coachella. We have always had a problem with it getting to hot and have to turn it off but now it overheated first day and lost all its charge from only charging 2 phones. We tried to put in on solar panel to charge but it will not charge at all. My…
-
Multiple Yetis?
I have a Yeti 1500X. I'm considering a second Yeti X to put in a different room. Is there a simple way to connect them to a) distribute power or to b) charge from one to the other and without using the tank expansion or home integration kits? It's looks like in another post, the HPP cable was ruled out for having…
-
Yeti 1000 dropping to Zero rapidly
I have a Yeti 1000 purchased from Costco about 5 years ago, that I have used for a number of years to power a Engel camping refrigerator, charging from a boulder 100 briefcase solar panel when camping. I am going on a festival Wednesday next week, and thought I'd try my 1100W DeLonghi Nespresso espresso machine. First pour…
-
Running an mobile ice cream business...
Hey all. I am straight confused. I need a portable power solution to run a freezer nearly identical to the one in this link - Omcan FR-CN-0200 - 34" Ice Cream Display Freezer - 7.1 Cu. Ft – iFoodEquipment.ca Our general use case would be to charge overnight, then head out to serve delicous ice cream at various locations…
-
What to do when an appliance asks for ground.
So I picked up a dual burner cooktop. It's 120 volt 60 HZ 1800 w 15 amp burner. I was reading the instructions before wanting to use it today and it said that it needs ground. I looked at the Goal Zero 3000x and the ground port is just plastic. So how do people use a Goal Zero with a product that needs ground? Is there a…
-
Was gifted two power stations ---
There was a fella who didn't want his power stations anymore, I'm not sure 100% why but he kind of alluded to they just didn't fit his lifestyle anymore. So he handed over to me a 3000x and a 1500x. The 3000x has a weird burnt smell coming out of the top and the 1500x has a slight weird burnt smell coming out of the top.…
-
220V problems
I have a YETI 200X that have a 220V issue. red light came and 220V dont work anymore. Why ? Tried to get help at a dealer but no help to get.
-
Charging one Yeti from Another
I have two Yetis: a 3000x and and a 6000x. The 6000X is connected to my home integration kit. Is it OK to use an HPP cable to connect the output of the 3000x to the input of the 6000x in order to supplement its power? I know I can physically do it but I want to know if that would put either unit at risk.
-
Yeti400 Lithium can't power my laptop?!
I bought a Lithium400 primarily to power my Alienware 17" R3 laptop and the laptop is powered with a 240w ac adapter. I plug this into the Yeti400 Lithium and it goes right into overload. This thing is supposed to have 1200 watts of surge power, which should cover any 'surge' but since the AC Adapter is 240w, I can't see…
-
what are the temp limits for locating the Yeti
What temperature limitations (hot or cold) for placing my Yeti1500x.
-
Why is my yeti 1500x flashing uPd where the output is?
-
Battery problem?
I have a Yeti 1000 purchased from Costco in 2018. It hasn't been used much and the SOC rarely gets below 50%, though a couple of times it has been completely discharged. Now when recharging the SOC doesn't get above 91%. Is this expected, or a problem with the battery? Thanks, Frank Smith
-
Pairing Yetti to Internet
I have tried everything that I can think of to pair my Yetti 3000. Is there an easy way to do so?
-
Yeti 6000x vehicle charging
Trying to do some research for a client on connecting their 6000x to the vehicle for charging. It seems we have two options, the YetiLink Vehicle Kit, that may or may not have issues with the smart alternator. Or we can source a separate "dumb" DC to DC boost convertor that will output 40v all the time and have to isolate…
-
YETI200X
Can I use the 12v cigarette lighter socket to run my CPPAP? Can I use a usb or usb c adapter in the 12v lighter socket to extend the number of plug ins?
-
I have a Yeti 1250
Trying to keep it charged, topped off, with a 5 W solar panel. Doesn’t seem to be working. Does the unit need to be on? Doesn’t seem to work either way. How do you know if it’s charging? Also, do I need to change polarity? I’m using the 8 mm connection.
-
I have a yeti 1000 The lcd screen is cracked can I get a replacement module?
-
Is this a problem?
Hi: I have a Yeti 1000 with an expansion battery and link. (See image below.) I notice that the “tank level” indicator has completely disappeared, having slowly decreased over the past month or so. I’ve had it continuously connected to the A/C adapter. Is this a problem? Also, I notice that the A/C adapter does not…
-
3000x output not working
I have tried resetting and have updated the firmware but I cannot get any of the outputs to work. Any suggestions would be appreciated.