-
Battery problem?
I have a Yeti 1000 purchased from Costco in 2018. It hasn't been used much and the SOC rarely gets below 50%, though a couple of times it has been completely discharged. Now when recharging the SOC doesn't get above 91%. Is this expected, or a problem with the battery? Thanks, Frank Smith
-
Pairing Yetti to Internet
I have tried everything that I can think of to pair my Yetti 3000. Is there an easy way to do so?
-
Shipping products for repair
I thought I was doing the right thing by shipping my Yeti for warranty repair/replacement in the protective Yeti case that I had purchased for it. However, when I received a new battery yesterday, it came without the case I had shipped my battery in. Will I get my case back or is it gone, gone, gone?
-
Yeti 6000x vehicle charging
Trying to do some research for a client on connecting their 6000x to the vehicle for charging. It seems we have two options, the YetiLink Vehicle Kit, that may or may not have issues with the smart alternator. Or we can source a separate "dumb" DC to DC boost convertor that will output 40v all the time and have to isolate…
-
Extension cord length from Yeti6000 to home integration unit
Can I use a longer extension cord from my home integration panel to the 6000 than the one provided? Especially if I use the same gauge cord? I need just a few more feet to go from the battery to the integration circuit on the wall near the fuse panel box.
-
When is a new version of the Nomad 20 coming?
I may want to buy a configuration of Sherpa 100PD 4th Gen and Nomad 20 for my outdoor activities. However, the Nomad 20 panel has a permanently installed cable which I don't need and which means extra weight. Also, there is a USB-A port and the new Sherpa works with USB-C. The Nomad 20 strikes me as outdated compared to…
-
Expansion Module not communicating with my 1000x
I got the expansion module today and installed it in my 1000x and plugged in one of the two tanks I have. I saw a full charge on the modules' LED indicators but nothing changed on the 1000x display. I ran the 1000x all the way down and the power from the tank never kicked in even though the module showed full LED bars. I…
-
Yeti Link 2021 Sprinter with Aux Battery
2021 Sprinter w/the Auxiliary battery under passenger seat. Can I connect my Yeti Link to the aux battery? It say NOT to install a secondary battery between the battery and the yeti link. The aux battery disconnects from the starter battery upon shutdown so current would only be flowing while the engine is on. The yeti…
-
6mm to USB Connector from Light Life 350 to Sherpa 1000pd
How do I get the USB to 6mm connector to be able to power the Light Life 350 from a Sherpa power pack?
-
charging optmization of venture 35
what's the best method for maximizing the useful life of these batteries? I understand that there are particular charging patterns that are better than others - initial charging to full and then up to 80% thereafter (like the EV cars). Does any of these have an appreciable effect on battery life long term? If so, what's…
-
yeti core 1000 intermittent charging
Hi, My yeti core 1000 does not constantly charge with the included 120w power supply. Charges for 2 sec, stops, charges for 2 secs, etc. The display also only shows a 20w input when it does charge
-
My goal zero lantern went on by itself. How can I turn it off?
-
Nomad 10 direct to iPad?
To keep charging my iPad while cycling, can I use a Nomad 10 directly wired to my iPad (version: iPadOS 16.3.1) with its 10,050mAh battery?
-
Can I order a replacement charger for my Guide10 battery pack and also the cord to charge solar?
-
Sherpa 100 stopped charging.
Was working and charging fine until last week. The AC power cord lights green and I have tried several different outlets. Nothing at all on the display screen. The small light comes on but that's probably the only remaining power. There is not a fuse warning. What can I do now?
-
YETI200X
Can I use the 12v cigarette lighter socket to run my CPPAP? Can I use a usb or usb c adapter in the 12v lighter socket to extend the number of plug ins?
-
I have a Yeti 1250
Trying to keep it charged, topped off, with a 5 W solar panel. Doesn’t seem to be working. Does the unit need to be on? Doesn’t seem to work either way. How do you know if it’s charging? Also, do I need to change polarity? I’m using the 8 mm connection.
-
I have a yeti 1000 The lcd screen is cracked can I get a replacement module?
-
Is this a problem?
Hi: I have a Yeti 1000 with an expansion battery and link. (See image below.) I notice that the “tank level” indicator has completely disappeared, having slowly decreased over the past month or so. I’ve had it continuously connected to the A/C adapter. Is this a problem? Also, I notice that the A/C adapter does not…
-
3000x output not working
I have tried resetting and have updated the firmware but I cannot get any of the outputs to work. Any suggestions would be appreciated.
-
Can I hook up a yeti to my existing solar panels or do I have to use the goal zero panels?
-
What happens when a Yeti 1500 reaches 104°F?
I need to use my Yeti 1500 in a hot place that routinely reaches more than 104°F. What happens if it does? I assume there is some kind of safety mechanism in place that will shut it down? or is the 32-104°F more of just a guideline? If it's just a guideline, is there a threshold that will trigger it to shut down?
-
Using 200x as ups
I'm using a yeti 200X as an uninterruptible power supply for a video surveillance system. It works and I like the long runtime on battery backup that the yeti provides, but will it wear the yeti out since it is under a constant load from the video surveillance system while simultaneously charging? The fan on the yeti is…
-
Charging in below freezing temps
I have the Goal Zero Yeti 1400 which I leave connected and charging to a Boulder 100 solar panel and a 45 watt Harbor freight solar array. The Yeti powers the lights in my unheated garage. Temperatures in the garage this time of year range from about freezing to 0 F. The GZ site suggests insulating the Yeti in a cooler in…
-
Charge Yeti Goal Zero 3000x from another Goal Zero 6000x???
Hi, is there any way I can charge my goal zero 3000x from another goal zero 6000x??? I have a Goal Zero 6000x connected to my Alternator with Yeti Car Link. And would like to have that 6000x charge my Yeti 3000x. Is there any way? Thanks sooo much for any help!
-
how to change yeti 400 lithium battery?
My Yeti 400 lithium battery needs replacing. I have a new lithium battery. How do I replace the old one with it? Appears to be more complex than I thought and all I find online makes it look easy but does not look like the inside of the 400 lithium.
-
Nomad 7 plus not charging
Hello, i am writing turkey. İ have a problem. İ have nomad 7 plus,( i used it 5-6 times ) my panel lights ( on the junction box ) is on one second, then it is turnning off and not charging. Why could it be. Thank you
-
Boulder Briefcase 200 Watt
Is it possible for 4 of these units to be wired in series and connected to a Victron 150/100 smart solar charge controller? This will be used to charge my RV batteries.
-
Cracked Display
Is this repairable? I just moved back to the U.S. after being stationed overseas and discovered this.
-
1500X to Roof of FJ Cruiser
So I have a 1500X GZ and want to bring power to the roof tent. I can wire anything, that's not a problem, but outside of splicing wires to get me there, does anyone have anything in terms of COTS that they can recommend to go from the USB A/USB C on the GZ to a female plug outside under the tent . . . .Anything is open . .…