-
Yeti400 Lithium can't power my laptop?!
I bought a Lithium400 primarily to power my Alienware 17" R3 laptop and the laptop is powered with a 240w ac adapter. I plug this into the Yeti400 Lithium and it goes right into overload. This thing is supposed to have 1200 watts of surge power, which should cover any 'surge' but since the AC Adapter is 240w, I can't see…
-
Fix for Sherpa 100AC and Topsolar SolarFairy 60W
The foldable SolarFairy is a great combination with the Sherpa 100AC, folding down to nearly the same footprint of the Sherpa. The issue is, the Sherpa is not resuming full charging after some clouds passed over the sky, it keeps being stuck at below 10W charging until the panel is disconnected and reconnected again. Is…
-
Yeti400 Inverter not working
Hey there Anybody out there who knows about repairing the inverter on my Yeti400? I bought it secondhand without realizing the not working inverter. When I wanted to use it, I realized something wrong. I switch on the AC ports, there everything seems fine. The display switches on, but without any usage there is a wattage…
-
Chain Boulder 15s to a Genasun controller
I'd like to chain my two Boulder 15s (no USB) to a Genasun solar controller to charge a LiFePO4 battery. -Does the "chain" feature connect the panels in parallel? -Is there an adapter available that would connect to the output plug and terminate in two wires to connect to the Genasun? -What is the polarity of the plug?…
-
Are there TSA restrictions for Venture 75 in carry-on luggage?
Venture 75 - Can it be included in carry-on luggage?
-
Question about my new Goalzero Sherpa 100AC
Hi - I have the crazy idea to perhaps power my travel cpap with this unit using a 12V USB-C trigger cable. Will the USB-C PD outlet on the unit negotiate 12V?
-
what are the temp limits for locating the Yeti
What temperature limitations (hot or cold) for placing my Yeti1500x.
-
Yeti 500wh charging
I recently purchased two nomad, 50!solar panels, and a nomad 100 cellar panel. How do I connect them to the yeti 500. I think I read somewhere you needed a special cable because of the extra power. Any suggestions?
-
Do you have a dealer program?
-
Why is my yeti 1500x flashing uPd where the output is?
-
Hooking up third party panels with boulder 100 briefcase panel
I have a 1500x and a boulder 100 briefcase panel. I want to hook up 3 100 watt renogy mono crystalline panels in addition to the boulder 100 panel for a total of 400 watts of panel input. I will wire them in parallel since the voltage in series will be greater than 50v.. I think… I’m a solar newbie so could be wrong. I’m…
-
Yeti Link Integration Kit
Can the Link vehicle integration kit be used with the auxiliary battery located under the passenger's seat of a 2006 Sprinter? This battery was used to power a 1500W inverter when needed for use when the vehicle was turned off. I've removed the inverter. The main truck battery is located under the hood and the 12' power…
-
Battery problem?
I have a Yeti 1000 purchased from Costco in 2018. It hasn't been used much and the SOC rarely gets below 50%, though a couple of times it has been completely discharged. Now when recharging the SOC doesn't get above 91%. Is this expected, or a problem with the battery? Thanks, Frank Smith
-
Pairing Yetti to Internet
I have tried everything that I can think of to pair my Yetti 3000. Is there an easy way to do so?
-
Shipping products for repair
I thought I was doing the right thing by shipping my Yeti for warranty repair/replacement in the protective Yeti case that I had purchased for it. However, when I received a new battery yesterday, it came without the case I had shipped my battery in. Will I get my case back or is it gone, gone, gone?
-
Yeti 6000x vehicle charging
Trying to do some research for a client on connecting their 6000x to the vehicle for charging. It seems we have two options, the YetiLink Vehicle Kit, that may or may not have issues with the smart alternator. Or we can source a separate "dumb" DC to DC boost convertor that will output 40v all the time and have to isolate…
-
Extension cord length from Yeti6000 to home integration unit
Can I use a longer extension cord from my home integration panel to the 6000 than the one provided? Especially if I use the same gauge cord? I need just a few more feet to go from the battery to the integration circuit on the wall near the fuse panel box.
-
When is a new version of the Nomad 20 coming?
I may want to buy a configuration of Sherpa 100PD 4th Gen and Nomad 20 for my outdoor activities. However, the Nomad 20 panel has a permanently installed cable which I don't need and which means extra weight. Also, there is a USB-A port and the new Sherpa works with USB-C. The Nomad 20 strikes me as outdated compared to…
-
Expansion Module not communicating with my 1000x
I got the expansion module today and installed it in my 1000x and plugged in one of the two tanks I have. I saw a full charge on the modules' LED indicators but nothing changed on the 1000x display. I ran the 1000x all the way down and the power from the tank never kicked in even though the module showed full LED bars. I…
-
Yeti Link 2021 Sprinter with Aux Battery
2021 Sprinter w/the Auxiliary battery under passenger seat. Can I connect my Yeti Link to the aux battery? It say NOT to install a secondary battery between the battery and the yeti link. The aux battery disconnects from the starter battery upon shutdown so current would only be flowing while the engine is on. The yeti…
-
6mm to USB Connector from Light Life 350 to Sherpa 1000pd
How do I get the USB to 6mm connector to be able to power the Light Life 350 from a Sherpa power pack?
-
charging optmization of venture 35
what's the best method for maximizing the useful life of these batteries? I understand that there are particular charging patterns that are better than others - initial charging to full and then up to 80% thereafter (like the EV cars). Does any of these have an appreciable effect on battery life long term? If so, what's…
-
yeti core 1000 intermittent charging
Hi, My yeti core 1000 does not constantly charge with the included 120w power supply. Charges for 2 sec, stops, charges for 2 secs, etc. The display also only shows a 20w input when it does charge
-
My goal zero lantern went on by itself. How can I turn it off?
-
Nomad 10 direct to iPad?
To keep charging my iPad while cycling, can I use a Nomad 10 directly wired to my iPad (version: iPadOS 16.3.1) with its 10,050mAh battery?
-
Can I order a replacement charger for my Guide10 battery pack and also the cord to charge solar?
-
Sherpa 100 stopped charging.
Was working and charging fine until last week. The AC power cord lights green and I have tried several different outlets. Nothing at all on the display screen. The small light comes on but that's probably the only remaining power. There is not a fuse warning. What can I do now?
-
YETI200X
Can I use the 12v cigarette lighter socket to run my CPPAP? Can I use a usb or usb c adapter in the 12v lighter socket to extend the number of plug ins?
-
I have a Yeti 1250
Trying to keep it charged, topped off, with a 5 W solar panel. Doesn’t seem to be working. Does the unit need to be on? Doesn’t seem to work either way. How do you know if it’s charging? Also, do I need to change polarity? I’m using the 8 mm connection.
-
I have a yeti 1000 The lcd screen is cracked can I get a replacement module?