-
Can i connect more than 600w of panels to my yeti 6000x app port rated at 600w?
Id like ask if its ok to series parallel panels beyond the 600w on the yeti 6000x app port (rated 600w). I plan to do parallel 3 sets of 2 140w 7.8A 24v panels. Series 2, 140w, 7.8A, 24v = 280W, 7.8A, 50v Having 3 in parallel gets to, 840w, ~24A, 50V The APP port on the goal yeti 6000 is 600W, 50V, 50A. My thinking is that…
-
Yeti 500x and 400Li have much different output voltages. Why?
My 500x and 400Li have much different output voltages when fully charged. The 500x indicates 13.44v and the 400Li 12.4v, when both measured using two identical dual USB/USB-C car chargers with LED display, rotated between power stations. Am I correct in assuming that the output voltage indicates state of charge (SOC)? If…
-
Can these power stations be charged by a windmill?
-
Normal behavior of Boulder 200bc - experience
I recently got myself a Yeti 3000X bundled with the Boulder 200 Briefcase, but we didn't have a fully sunny day since then to observe the Boulder's full performance. Since I'm new to solar and all, I'm wondering about what I could expect. So far I can observe the following: With a cloudy sky (even bright diffuse light…
-
YETI Link expansion Module
I have the Yeti Link installed on my 1400 and 2 expansion batteries attached. It is plugged into the wall. The input light is on and only one green light is lit. It is not blinking, so am I to infer that it is not charging. Any suggestions
-
The Little Things
Haven’t tried the product yet, but made two orders. First concern is that I received FedEx tracking numbers linked to the UPS tracking system on both orders. Second concern is I ordered a package with 2 Boulder suitcases. A package with no way to link the two solar units just seems cheap. Hence the second order. If the…
-
Charging Lighthouse Core & Lighthouse 600
I looked on the product page, and in the user manuals. I seem to be finding conflicting/omitted information though. For the Lighthouse Core & Lighthouse 600 is it recommended, or acceptable, to leave these plugged in when not in use? The web page for the Core says to leave plugged in on the "shelf life" info, but the page…
-
My Yeti3000x stopped charging!
My Yeti3000x just suddenly stopped charging. I purchased a replacement sherpa charging cord, but it still isnt charging. Any suggestions?
-
Where can I get a manual or instructions for the 1250?
I havent used my 1250 yet and have lost a lot of pieces. Especially the manual or instructions. I also want to get a charger for home outlet.
-
How to connect and use with a camper trailer and power for home
I would like to use a Yeti 3000 generator with my camper trailer when we are camping without electrical hookup. I have a cord that plugs into a 120 outlet from my my camper. Is this what I would use to plug into the generator. If I plug into the generator with the camper would I be able to use an oxygen machine throughout…
-
YETIX 600W POWER SUPPLY
The User Guide states: NOTE: Not compatible with Yeti Lead Acid, Yeti Lithium, or the Yeti 200X/500X Power Stations. If a Yeti 1500X has one or more Yeti Tank Expansion (Lead Acid) installed, may the YetiX 600W Power Supply still be connected to the Yeti 1500X for charging?
-
Yeti 1500X, Tank Expansion, 600W Power Supply
Can I attach my 600W Power Supply to my 1500X and AT THE SAME TIME attach the 8mm Power Supply to the Link for charging my Tank and additional AGMs? I know that the 600W cripples the 1500X 8mm ports. However, I assume the 8mm Port on the Link is still powered. I don't have this equipment; only doing research prior to…
-
AGM to Lithium Battery
I have a Goal Zero Yeti 1250 and would like to remove the AGM battery I am currently using and eventually replace it with a Lithium battery. Is this plug and play as long as the battery fits inside and can I also use the daisy chain feature and add a second lithium battery.
-
12v outlet
Good day! We have a Yeti 1000 Core that has been put through a lot and performs flawlessly. My question is this, (though I should already know the answer) can the 12v be expanded? Can all of the 12v options be used at the same time. We currently power a fridge/freezer off the “cig” lighter port. We also have a diesel…
-
Connect
Are there cables to connect parallel two 3000? Thank you
-
Yeti Link update to firmware 1.8.4
Hi, i have a Yeti 1500x installed in our cam-ervan with a Yeti Link and a B-to-B charging option. I have just updated the firmware to 1.8.4. The battery/tank lights keep burning, even when I am in CAR mode. This gives a lot of green night during the night Is there a way/trick to switch the green lights off? Eric
-
Yeti 1500X Battery Replacement
The User Guide states: DO NOT tamper with or attempt to replace your battery. For information about a replacement battery contact the Goal Zero solutions center. What is the procedure when a new battery is required?
-
Yeti Link & Lithium Battery - Why Not?
I have extra GZ EC8 to ring cables, so physically, I could easily connect a lithium battery to the link that's installed in my 1500X. Something I often do with extra AGM & other deep cycle batteries I have sitting around. So, what is it about the Yeti Link design or circuitry that prohibits the use of a lithium battery in…
-
How to get a new (<1year old) Yeti 200X's MPPT input fixed.
I bought a Yeti 200X from REI in July of 2022, and it worked at first, but today (Jan 28, 2022) it would charge form neither my Nomad 50 solar panel, wall adapter, nor from a third party solar panel regulated to output 19V. How would I go about getting this fixed. Do I need to do a warranty claim, and if so, how do I go…
-
Beware YETILINK EXPANSION MODULE melted plug and expansion module!
version 2 melted plug and expansion module. version 1 was recalled for this exact reason. brand new yeti 1500x with the YETILINK EXPANSION MODULE + 1Yeti Tank Expansion Battery + 30-AMP EXTERNAL MPPT the battery is being charged by panels through the mppt and then the battery feeds into the yet1500x via the expansion…
-
UK 6000X inverter voltage
Hi Can anyone confirm tha tthe inverter in the UK model of the 6000X is 230V AC? I ask because some suppliers say it is 120V AC but I suspect this is because they have copied the US product information for their websites Thanks
-
specifics of power cord supply to yeti 400 ? 19v?
I bought a yeti 400 portable power station that is missing the power cord and there is nowhere that I have seen in which states exactly what correct replacement charger I should be looking for in reference to ac/dc ,v and model number . I have tons of cords and just might have one that will work - if I knew what to look…
-
YETI 1000X Programing
Hi everyone. tried to find information by my self, but there is empty. I have yeti 1000x, 120w charger, output - 50-100w First problem (where start is) - it was uncharged, but slowly. it was almost 4 weeks, always on charge 120w and output AC 110w maximum. I saw, that every day battery get lower and lower. I try to figure…
-
Charging with a small Petrol Generator
I bought my Yeti X to power my fridge at home if we lose power for more than a few hours. I purchased a solar panel to recharge the power station during the day. Starting with a fully charged power station and supplementing that with the solar panel, I figure I can get several days out of it. But, if I am unlucky and have…
-
Yeti 1500x with 4 Boulder 100 charges slowly
I have a Yeti 1500x. I have 4 Boulder 100 panels. I have a High Power Port connection coming from the panels to the yeti. When connecting the solar input, charging from full sun will yield 300+ watts input but only briefly. Even though the panels seem to able to send more watts, the yeti scales down to about 170 watts…
-
Expansion Batteries Connected?
I added four Yeti expansion batteries to my Yeti 1500X (with Link), but the Yeti App on my phone only displays 1500WH of Accessible Energy (I added the 4 tanks to the link in the app). Does the app not read the expanded tank energy? They are all charged to full capacity.
-
cleaning solar panels
What type of maintenance should I do for my Ranger 300 solar panels? Cleaning for example.
-
Powering Light a Life 350 LED lights with Sherpa 100ac
How can I power my lights with the Sherpa 100ac? What adapter do you recommend?
-
Yeti 1000x paired with Harbor freight 100w Thunderbolt solar.
I was just wondering how many of these panels can I connect to my yeti 1000x. I have the MPPT module. I also have the igreedy 10 AWG Solar Connector to SAE and the hpp 4 port connector. The panel has Rated Output 18 VDC / 100 W / 5.56A. Thank you for any help.
-
Wifi off after outage I'm traveling
I'm currently in Thailand and we had a 15+ hour power outage at home in California. Power is back on but I cannot access my yetti 3000x as the software turned off the wifi (to save power). I had the Yeti in hot stand by running the frig, freezer and 2 lighting circuits. Now there is no way for me to know the status of the…