-
Incorrect voltage showing in App for Yeti 1500X
Hi, My Yeti 1500X 230V/240V incorrectly shows input voltage as 120V in the App. This is a persistent problem that has survived firmware upgrade, device resets, discharge to flat/recharge, App uninstall/resintall with clearing of cache and data on Android. How do I get the app to show the voltage it's actually operating at?…
-
Can a 10+ yo unit that doesn't hold charge, battery be changed?
Thank You
-
Where do I find detailed documentation (not just a user manual) on the 3000x?
I would like to know all the options for revealing various operational aspects of the 3000x (such as charge cycles). I am asking for something more detailed than the simple user manual. thanks.
-
air conditioners?
Which Yetis can power a small window air conditioner (400-500 watts)?
-
Yeti 500x won’t charge
I purchased my power station yesterday and have had it plugged into the wall for about 20 hours and the display is still flashing on 20 in the battery life graphic. Is this normal? The user guide says it should fully charge in about 10 hours. I’m worried something is wrong.
-
I am new to Goal Zero and have a question about protective boxes.
I need to charge (using the Goal Zero 12v charger) my new 500x in my truck bed. I don't have a camper shell and want to protect the unit from dust and rain. Any tips on boxes? Would it get too hot in a cooler?
-
SUP pump
I am trying to get my paddle board pump to work with battery but it won't seem to work on my yeti 500x. is there an attachment that I need to have this run? is there an option so I can pump up 4x pumps at the same time? here is what I am using and with my vehicle I can have 2x of these going at the same time using the…
-
How do I update Link firmware?
I was told prior to purchasing that the latest firmware resolves the smart alternator charging issue. The app allows me to update the Yeti 1500x firmware (now 1.8.0) but the link firmware is greyed out and shows 1.5.7. How do I update this, because the Yeti only charges momentarily. And the wattage bounces all over.…
-
Is it ok to mount/store my goal zero 1500 on its back?
It is much easier to access the front panel it it unit is placed on its back. Is there any problem with this?
-
Yeti 1500X Inconsistent Charge
Regardless of Input source (wall charger or solar panel), the blue Input light never comes on and there is no Input Wattage ever shown...just 0. Despite this, I am able to charge from the wall charger (still 0 Input & no blue light). The solar panels are producing, but no charge at the Yeti. I've reset but no change.…
-
Are any of the power kits able to provide 9000 watt hours a day with enough panels ?
Total newbie to solar but after calculating our needs for a 10x12 cabin which needs ac and heat a few months out of each year, I see that I need 9000 watt hours a day. We are in southern CA high desert.....no shortage of sun. With enough panels (how many ?) is there a Goal Zero unit that will give me this and what would…
-
Optimal setup for solar panels on Yeti 6000X
Hi all, I'm quite new to power stations and their solar panels, hence I've got a few questions on my mind. So I've read in many places that the max supported solar input is 600W, but at the same time 1200W* Rated Panels (4x Ranger 300/etc.): 11-12 Hours of sunlight My winters can be pretty gloomy, so I plan to have 4…
-
Yeti Link- Light Breakdown
Tank Mode Low Voltage- 10.7V + 0.2V = 10.9V to start Car Mode Low Voltage- 13.0 + 0.2 = 13.2 to start
-
Check my math please...
I'm looking at a way to power my condo during downtimes, such as events like Hurricane Ian we just went through here in SW Florida. See if I am correct on this please: Refrigerator: 115 v x 2.1 amps = 356.5 watts. To run for 24h would be 356.5 x 24 = 8556 watt-hours. Seems like this exceeds the capacity of your electrical…
-
Shipping
Do you ship to Hawaii?
-
Fast Charging Yeti 1000 Lithium
Are there any alternative methods to fast charging a Yeti Lithium now that the 25A Charger has been discontinued? I currently have a 1000 Lithium with the 2400Wh Expansion System and had my 5A charger (the switching power supply that originally came with the 1000) die recently. I was hoping to upgrade to something that…
-
Yeti 400 Lithium Deader than a Doornail
Will not charge. Went from 95% to zero to useless brick over a 24 hour period. Holding down the info and unit buttons did not reset the unit. Any suggestions?
-
Solar Input Disables Other 12V Inputs - Expected Behavior?
Something I just noticed, and I don't know if this is a limitation of the Goal Zero, or if there is something wrong with my unit. When my solar panels are plugged in, even if they are making BARELY any wattage at the end of the day, the 12V inlet from the 120V power brick seems to be disabled. The moment I disconnect the…
-
Problem Charging Yeti from Foldable Nomad 100W Panel
Yeti 1400W stopped acknowledging solar input Via the 8mm Connector from Nomad 100w Foldable panel .Could not get a reading using a Multi meter so bought a new connector MC4 to 8mm. Getting a reading with multi meter of 19.6 V but nothing registers as input and no charge occurs. The Yeti does accept AC charge. Please help.
-
combining boulder 200 with nomad 200
ccan I plug the boulder 200 and the Nomad 200 into both inputs on the generator...or do I need the combiner?
-
Power Bank Status 6000x with 4 tanks.
I can see the charge status of my 4 tank batteries on the link module led's. I don't see any status on the Yeti app. Is there any way to see the tank status remotely?
-
AC outlets not working on 1500x
I bought a van that came with a goal zero 1500x charged by solar. There wasn't any documentation. The AC outlets worked in the past but now are not working. The light above turns on and off when I push it, the app also can apparently turn the AC outlets on and off but no effect to what's plugged in. The unit otherwise…
-
(solved) 1500x doesn't charge after firmware update
(solved I guess?) I just got a 1500x and when getting familiar with it, realized the firmware wanted an update. Update went fine, all functions still work fine, when I plug in the wall charger now it no longer charges. Both blue lights come on, green light is on on the charger power brick, no charge, no blinking battery…
-
Firmware showing as “up-to-date” when newer versions available?
Thinking it might be a long shot, but has anyone had issues with the latest firmware update not showing as available on the goal zero app? The firmware for our 3000x is showing as 1.7.6 and “up-to-date” but there have been at least two released updates since 1.7.6 (so this is clearly not correct). We really want to update…
-
Yeti Link Expansion Module in Car mode - Tank LED lights, etc.
Can someone dumb down the Link kit in car mode for me? While in car mode what are the Tank LED Lights reading? Is there any significance between green/flashing red, etc..... Does the Module ever have to be charged or does it get charged by the direct link to the Yeti? Can energy flow back to the Lithium battery of the…
-
Charging watch with Sherpa15, times out after a minute
I'm preparing for a backpacking trip and want to charge my Epson J-307 watch with my Sherpa15 that I bought at REI. The only trouble is, after one minute the charging stops. Is there a way I can force the sherpa15 to do low amp charging for longer?
-
Display brightness Sherpa 100AC 3rd gen
Can the display brightness of the Sherpa 100AC 3rd gen be increased? It is OK inside (not really bright but OK to read), but outside with the slightest sunshine becomes absolutely impossible to read, no matter how I try to shade the display..
-
I received a 100PD as a gift two weeks ago and my display stopped working. any ideas?
I received a 100PD as a gift two weeks ago and my display stopped working. any ideas?
-
Warranty
Where can I register my new Sherpa 1000AC?
-
Yeti not charging I bought it online what can I do
I need customer support