-
Plugged in my laptop and ZAP
Earlier today, I plugged my one week old laptop into my Yeti 1000x using USB-C, and the moment the cable was plugged in, there was a POP noise from the laptop. Kinda like a electrical arc zap, if you're familiar with that noise. At the same moment, the laptop turned off. The laptop is now dead and won't turn on at all.…
-
Software Functionality for AC Power Bypass
Greetings. I own a Yeti 1500x and 600w of Boulder panels. In the summer I run a portable AC unit off the battery, now that we're getting into Fall, I've taken my refrigerator off-grid with it. What I've found is that, depending on various factors, my Yeti comes up about an hour short of keeping the fridge going overnight…
-
Yeti 200x batteries
Good day, I’m wondering how long the battery in this device lasts, and how does one have the battery replaced? Thanks, Bob
-
200x
Can the yeti 200x power a small electric heater for a tent?
-
Yeti 200X displays 0 with blue charging icon, but won't charge or output. Reset doesn't help
-
Lithium 400 does not turn on but links once
When I plug in the charger I get a short blink on the display and on the input led. But then it goes dark. Reset doesn't help. I am going to try a different charger any other suggestions?
-
Sherpa AC taking apart to replace batteries
-
My yeti 3000x has 0% charge. I have it plugged into the wall outlet. What could be the problem?
-
Yeti 1000x external mppt charge controller
I am new to the lithium world. My 1st purchase was the yeti 1000x. I am very happy with it. Now I've gotten some off brand(Dokio 160w) solar panels. My question is, will an external mppt charge controller improve the charging time or does the integrated mppt controller all I need? I have managed 75 to 80 watts with the…
-
How do I connect the 30 ft HPP extension cable to my Ranger 300?
The cable plugs right in to my 3000x, but I see no way to connect the other end to the solar panel. Both connectors on the HPP cable have the same (male?) end. What am I missing?
-
Nomad 10 and Yeti 150 cable question
Hey y’all, I have a nomad 10 panel and a yeti 150. I don’t have the cable that connects the usb port from the nomad 10 to the charging input port on my yeti 150. I’ve searched everywhere and can’t find one. Can y’all post a link, or provide input or guidance on how to obtain that cable so I can start charging the yeti with…
-
Yeti 1000X + Yeti link + Tank
Hi! just installed a yeti link and tank with my Yeti 1000X. Since the yeti link has it's own input for the tank, can I plug the 8mm charger to it and an Anderson from my two boulder 100's to the Yeti itself at the same time? Thanks
-
No power to panel
Hello there! I have a Yeti 3000 power station that I inherited with a skoolie, so I know very little about it or how everything is wired. Previous owner wired up a 12 volt panel with toggle switches, USB and 12V outlet and it was working, then just stopped. It appears that there is no power to it. It's connected to one of…
-
Connecting two Yeti 1000 in parallel to the Home Integration Kit
I have two Yeti 1000s, I would like to use them in parallel with the home integration kit to combine the capacity of both for backup power to my home without having to manual switch from one to the other, when the first one runs out of juice. What would happen if I make/use a combiner cable to combines outputs from both…
-
Goal Zero Tank Expansion Battery Hack
I have added a Victron Smart Battery Protect to the tank 12v 100ah AGM Battery. Goal Zero told me that the AGM battery in the tank could be drained to zero no problem. If you are running devices off the Yeti and the demand is there the Yeti will run the Tank and the Yeti all the way down to 0. You can set a cutoff voltage…
-
Can I plug in a 65 watt laptop charger, USB-C, into the USB-C 60watt in/out port on Sherpa100AC?
-
Plugging in an oxygenator
I am on oxygen 24/7. I have a Yeti 3000X in case the power goes out. A few nights ago the power went out at 3:30 am. Fortunately, I was awake when the power went out and plugged my oxygenator in. That got me to thinking. What if I hadn't been awake? So I thought the best thing to do would be to plug in my oxygenator into…
-
SOLAR PANEL NOMAD 50
can I use a NOMAD 50 solar panel on a coal zero 150 gen.
-
just hooking up my new generator-need advice
Hi, I lived in a manufacture home in SW FL. I bought the 1500 with the integrated panel which a election is installing for me. I plan on running the extension cable under my crawl space to the outside where I can plug in the solar panel briefcase which I bought. I cannot put it on the ground because of when it rains…
-
Yeti 1500x and Tank Battery questions
just installed 1 tank battery on my yeti1500x with the 30a solar charger. everything works as expected. Questions: the yeti usually draws 150amps (output) but when it is charging from the tank this goes up to 220amps. whats going on here? will the tank battery stop charging the yeti when its capacity reaches 50% which is…
-
Charging extra battery
If I have an extra battery chained to my Yeti 400 will it charge when the Yeti is charging?
-
Is there a replacement battery for the Goal Zero Yeti 1250 Solar Generator
I noticed my battery and my second battery are not charging. I had both for over 3 years and it is most likely time to change them.
-
GZ Lighthouse250 dead. Lights when cranked. Lights when charging. Charging LEDs show full charge.
-
Chaining GZ Solar Panels
I recently purchased a Yeti 1500 with a Boulder 100 Briefcase panel, and a Yeti 200 with a Nomad 20 panel. I already own a Nomad 20 panel and a Torch 500. I expected the Boulder 100 Briefcase (B100B) panel to collect less than 100 Watts at my Midatlantic home. On a recent sunny day it peaked around 82 Watts based on the…
-
Used Solar Panel
Can I connect used residential solar panels to the Yeti Link to charge the Expansion Tank? I have a yeti 1500x which the panels charge it ok but I am not sure if the input volts is too much for the Yeti Link. See photo for solar panel specs. The used panel's output is about 85% (according to seller) of the wattage listed.…
-
Charging expansion tanks.
I have been running 2 expansion tanks on my Yeti 1400 successfully, I bought 2 more open box tanks and added them 48 hours ago. Is there any particular order they should be chained? The original 2 tanks are on the bottom and the 2 new tanks are on top and plugged directly into the Yeti. i don’t think they are charging…
-
Adding capacity in my van with yeti 1000
I have a yeti 1000 in my van with Yeti link to charge the battery with the alternator. Can i add battery capacity while keeping Yeti link connected to the alternator
-
Recommended battery settings for charging Tank with Victron MPPT?
I can't find any information on what would be recommended battery settings for charging a set of (6) Yeti Tanks from solar panels with a "Victron MPPT 100 | 30", i.e. the offical "30-Amp External MPPT" set offered by Goal Zero, in order to avoid over and under charging for extending battery life. I understand that the Tank…
-
Will a Yeti 500 or 1000 power a sump pump?
I have a sump pump in my basement. I don't have specs for it, but generally, would a Yeti 500 or 1000 be enough to keep it running for a few hours during an power outage?
-
Connecting Boulder 200 Briefcase to 2x Boulder 100 Panels -> Yeti 1000x
Hello Goal Zero Community! I recently chased after my dream of that sweet-sweet van-life and purchased a van with an existing solar setup. The setup is 2 Goal Zero Boulder 100s connected to a 4-way 8mm to Anderson Power Pole (APP) connector which then connects to a Goal Zero Yeti 1000x. I understand the APP port on the…