-
Yeti 400 and 2 Boulder 30 panels
I have a Yeti 400 I got and 2 Boulder 30 panels that I picked up a few years ago, and I finally decided to take them out of the box. The Yeti seems to work fine, and charges when hooked up to the AC adapter. It is at 80 percent battery right now. When I daisy chain the 2 panels and plug them into the Yeti, it won't charge.…
-
What system?
Looking for recommendations. Going on a two week hunt/camping trip and will need to charge, IPad, phone, dog collars and transmitters. Probably will find a motel every 4-5 days. What would you recommend?
-
AC power adaptor for Sherpa 100ac
Hi folks, I'm looking for a compatible AC adaptor to charge a Sherpa 100ac and found this one on Amazon but it looks like the output I am reading might be too high. When I plug it into an AC outlet it is outputting 29 volts and the sherpa unit says "max 22 volts". I want to make sure I am not going to damage the unit by…
-
Charge shutdown and Solar panel issues (2 question)
Model: Sherpa100PD (22060-11-21A09981) I'm on a cycle tour and love the 60W fast charge from mains, but having issues powering devices. Maybe my use case is different, maybe it's a firmware glitch, please could you clarify? There are 2 issues for discussion and I ask here as two separate questions. 1st question: I navigate…
-
Capacity loss after 2.5 years - Yeti Lithium 1000
Hi I own since January 2020 a Yet Lithium 1000 I'm very happy with. But since a few months it's loading only up to 83% (on it's display). So for me it looks like it has lost 17% of it's capacity in just 2.5 years?? Can that be and is that normal?
-
Sherpa 100 AC
Does anyone know how to adjust the brightness on the screen of the Sherpa 100 AC?
-
My yeti 400 is 100% charged but is not working is it toast?
-
Yeti 3000 screen went blank faint clicking sound not working
My Yeti 3000 has just failed while on holiday.. the screen went blankand a faint clicking sound started. I have tried resetting the yeti by pressing the 3 buttons it does nothing, I have now taken the top cover of and disconnected the battery, when re connecting the battery it does nothing no lights but a fail clicking…
-
Why isn't anything be developed with lifepo4 batteries?
-
I have my Yeti connected to a charger but it is at 98% and not charging, what is going on?
In order to get the most life out of your battery we make sure to not stress the battery pack at the full state of charge. The battery will charge to 100% and then stop, self discharge over time to 98% before the charge will engage again. If you want to make sure your Yeti is completely topped off for upcoming use,…
-
The pins on my laptop cable are too thick for my Sherpa 100AC
Hey, I bought the Sherpa 100AC with the hope that I would be able to charge my laptop with it. In theory it should work but the pins on the cable are too thick for the holes in the sherpa. Is there a cable adapter I can buy or something? See pictures for extra explanation.
-
Changing charge profiles with yeti link expansion tanks installed
Is there any way to change the charge profile on the yeti X lines while expansion tanks are being used? i am able to change the profiles on the app but it seems to have no effect and continues to keep the yeti 1500X at 100% while not following the charge profile i assigned. This only happens when the expansion tanks are…
-
How do I get my Yeti 1500X to charge more than 84%
I bought the Yeti 1500X and have charged it using both solar panels and plugging into the outlet. But it will not charge more than 84%. I have tried as suggested - run it down and recharge a few times - but the highest charge it ever gets is 84%. I tried unplugging it and waiting and re-plugging it in, but still stops at…
-
220VAC Split Phase with the Yeti 3000x
We have a well pump we would like to power and ideally do it thru our breaker panel. This would require 220VAC split phase operation. Can the unit be wired for that. Better yet, if I have two units, is there a way to parallel the operation of the two units to get split phase operation? I would create a plug into our…
-
Torch 250 - Can I purchase a replacement USB charging cord?
The lime green USB charging cord is no longer working on one of our Torch 250's. Is it possible to get a replacement cord that I can install to fix the faulty one?
-
Sherpa 100AC Phantom Input
Good afternoon, My sherpa 100AC seems to be showing a constant 49w input on the p1 port even when nothing is connected, I've tried a reset and that didn't clear it, dies anyone have any idea how to get it to reset?
-
Solar Panel on Roof
Do I need an electrician to install a 100 watt solar panel on my house roof? Or what kind of person is best for doing that?
-
Where can I get a replacement battery for a Yeti400 Lithium?
-
Yeti 1250 power
How many external batteries can I connect to my 1250 Yeti power pack??
-
Heat Waves
Do extreme heat waves adversely affect the solar generator/panel's ability to charge? I have a couple of 1500x' with expansion batteries and Victron MPPTs. Although there was very clear skies during the heat wave (Western USA), the expansion tanks depleted 50-75% although usage remained constant (as preceding weeks).
-
Is it normal for a Yeti 3000X to be constantly charging?
I have a Yeti 3000X. I keep it plugged into the wall and nothing is connected to it. I've noticed that it doesn't charge up to 100%. Instead it somehow runs down to 94% and then recharges. Is there something wrong with my Yeti?
-
first time use yeti400 lost power immediately
Lost power at home due to severe storms yesterday. Fortunately, had my new (bought 6 mos. Ago), never used yeti charged at 100%. I plugged in 2 phones for a few minutes to make sure it worked, which it did. Still at 100%. Unplugged phones so nothing was plugged into yeti. Got up this morning....60% despite nothing plugged…
-
Sherpa 100 ac display brightness
Hello, I am unable to read the display in normal (room) lighting conditions. Only when in the dark am I able to read the display. Is it bust or is there a brightness control function I can try? Brg Marius
-
Yeti Tank Expansion Battery 23100 vs. 23105 V2?
I have four original Yeti Tank Expansion Batteries (SKU 23100) connected to my Yeti 1400 Lithium Portable Power Station with WiFi. A few days ago I ordered two more Yeti Tank Expansion Batteries and when they arrived I noticed the boxes and pack list were labeled with SKU 23105, and the pack list says "V2". What is the…
-
Is there a way to force charging with a Flip?
I recently tried charging a Garmin watch with a Flip 24. The watch charged to about 70% then the fully charged Flip powered down. If a pressed the Flip’s button, the watch started to charge again but only for about a minute before the Flip powered down again. I assume this was due to the low power draw from the watch. I…
-
Power tip adaptors
Hi there. I bought the 20w solar panels to charge my cooler. But my cooler has a 6mm tip (approx). Any suggestions on adaptors from the 8mm plug to the 6mm please.
-
Possible to charge USB with maintainer
I have a vehicle maintainer 10 from goal zero and want to know if it's possible to use it to charge a USB device. The only plugs that came with it are related to connecting to a vehicle.
-
Can I get that price?
-
Yeti 6000 and Nomad 200 Panels
I have 3 Nomad 200's connected and input power is only registering 250-350 watts (& 11.7 V) in full sun. Shouldn't the input energy be higher? I've checked the connections and all seem to be good. Thanks
-
Yeti car link shut off switch -3000x
Hello I'd like to put a main switch in line with my yeti car link. I have a 3000x power station. I won't need the car charging very often and would like to leave it off entirely most of the time as my solar is 100% sufficient 4 months out of the year. Any reason I should not do this???