-
Sherpa 100AC not charging my phone via usb c port
Have had no problems since buying my Sherpa several years ago. Suddenly the USB c ports will no longer work for charging my Google Pixel 6 phone. The wireless port will work. And I can still charge the Sherpa using the USB c ports. Looking for any ideas as to why this would be happening. Not having any problem with the USB…
-
minimal current
I need a power bank, that does NOT switch off, if the current of a connected device is getting very low (7,5 mA). I want to power a «arduino nano every» board in sleep-mode. The power bank (not GoalZero) I own now is shuting down after a minute of low power consumption. Has the «Sherpa 100PD (Gen 4)» a protection feature,…
-
Portable Power Banks
You guys are a lot richer than I am, otherwise I'd just pick one. Am I looking into something too much and too expensive for me ? Do.you have to buy solar panels or are they included? I just need a step up from a USB power bank and solar would be nice. Email me this probably won't be monitored. Owner@braceletme.services
-
1st Gen Sherpa 100AC Problem
I have an original 1gen Sherpa 100AC purchased in 2018. I am having problems with the AC output. With a fully charged 100AC when I press the AC outlet button, the blue LED does not activate. “AC” shows on the OLED panel briefly but disappears within a couple of seconds. Plugging an item into the AC outlet, it does not…
-
Sistema eléctrico
Quiero saber primero como cargo el banco de energía en cada no hay explicación técnica ni video y en caso de ser 220 volt 60Hz hay en inventario bancos con estas características en existencia para usar en mi país que usa sistema europeo. Espero su pronta aclaratoria gracias.
-
I let my Yeti 500 Lithium go completely dead (zero charge).
When I plugged it in, the display came to life but the input power is showing 0 watts. How can I bring it back to life?
-
Venture 75
Why doesn't my Venture75 charge my Surface Pro8 with a ausb-c 15V3 cable for the surface?
-
Sherpa 100PD 1st gen blinking green led
Hello. Our Sherpa 100 PD does not seem to want to charge. It has a fast blinking green light. No other LED lights or buttons are responsive. It seems to be able to charge a phone with what little charge it has left but the induction charging does not work. Can this be fixed? It's my wife's charger and she bought it within…
-
Fix for Sherpa 100AC and Topsolar SolarFairy 60W
The foldable SolarFairy is a great combination with the Sherpa 100AC, folding down to nearly the same footprint of the Sherpa. The issue is, the Sherpa is not resuming full charging after some clouds passed over the sky, it keeps being stuck at below 10W charging until the panel is disconnected and reconnected again. Is…
-
What do you want to see in a future generation of the Sherpa 100AC and Sherpa 100PD
I am a big fan of the Sherpa 100PD (also the Venture 75) but what would make it better?
-
Should the output of the Sherpa 100ac be fluctuating or stable?
I received a new Sherpa 100ac today. After various tests with multiple cables, I have yet to see anything close to 60 or 100 watts from the usb-c ports. The output fluctuates anywhere from 7 to 24 watts top. Is this normal?
-
Initial Charging Of A New Sherpa 100PD?
I just received my new 100PD (prev gen) today, and plugged it up to charge. The charger I'm using is a PowerPort 2 Elite, model # A2023, usb A to usb C. Output shows to be 5.0V, 2.4A. I'm starting to wonder if there is a problem. When I plug it up, the power level display on the 100PD comes on, displaying two zeros. The…
-
Can I safely charge a Flip 36 on a Nomad 100?
Will any of the power bank items be damaged by charging them with higher output devices? For example the maximum output of a Nomad 100 is much higher than the max input of the Flip 36. Would than cause any short or long term damage to the Flip 36?
-
Connect
Are there cables to connect parallel two 3000? Thank you
-
Sherpa 100PD won't charge from 60w USB-C port
Hello, I have a small foldable 60w panel, with both USB-C and USB QC 3.0. The Sherpa charges just fine when I have it on the USB QC 3.0 port, I've done a few full cycles with it. But when I attach it to the USB-C port, it will draw power for a second, flash off, draw power for a second, flash, off, do this a few times,…
-
Venture 70
I have a venture 70 that is probably getting close to end of life at 5 or 6 years old. It was taking longer to re-charge, and most recently it would not charge over 40%. After a soft reset and then a factory reset/storage mode, it appears to be charging normally again and has just the final flashing led left until full. Is…
-
Sherpa 100 AC keeps turning off
I have a device plugged into the AC outlet. It powers off after 5 minutes of operation.
-
Sherpa 100AC performance charging a MacBook
I'm getting about 60% charge on a MacBook 16" 2021 from my Sherpa 100AC. Is that typical?
-
Sherpa AC taking apart to replace batteries
-
Can I plug in a 65 watt laptop charger, USB-C, into the USB-C 60watt in/out port on Sherpa100AC?
-
Charging expansion tanks.
I have been running 2 expansion tanks on my Yeti 1400 successfully, I bought 2 more open box tanks and added them 48 hours ago. Is there any particular order they should be chained? The original 2 tanks are on the bottom and the 2 new tanks are on top and plugged directly into the Yeti. i don’t think they are charging…
-
AC power adaptor for Sherpa 100ac
Hi folks, I'm looking for a compatible AC adaptor to charge a Sherpa 100ac and found this one on Amazon but it looks like the output I am reading might be too high. When I plug it into an AC outlet it is outputting 29 volts and the sherpa unit says "max 22 volts". I want to make sure I am not going to damage the unit by…
-
Charge shutdown and Solar panel issues (2 question)
Model: Sherpa100PD (22060-11-21A09981) I'm on a cycle tour and love the 60W fast charge from mains, but having issues powering devices. Maybe my use case is different, maybe it's a firmware glitch, please could you clarify? There are 2 issues for discussion and I ask here as two separate questions. 1st question: I navigate…
-
Is there a way to force charging with a Flip?
I recently tried charging a Garmin watch with a Flip 24. The watch charged to about 70% then the fully charged Flip powered down. If a pressed the Flip’s button, the watch started to charge again but only for about a minute before the Flip powered down again. I assume this was due to the low power draw from the watch. I…
-
Simultaneous charging from bicycle dynamo
1. Will the Venture 35 work with a bicycle dynamo? 2. Can I charge my phone while I'm charging the power bank from the dynamo? 3. What power bank fits onto the back of the Nomad10? The Flip12? 4. Can the Flip 12 also be simultaneously charging from a bicycle dynamo while charging another device?
-
Powering Surface Go computer with power bank
Which power bank of Goal Zeros can charge a Microsoft Surface Go computer? My Venture 70 doesn't do the job, the Surface don't charge and requests me to switch to a real charger. Thanks a lot!
-
Venture powerbank in cold conditions
Hi, the Venture 35 and 75 power banks are rated to function between 2-113F (0-45C) Does anybody have experience in using them in (a lot) colder temperatures? I especially think about charging in a very cold enviroment.
-
Sherpa 100ac problem with usb c pd
Hi, When connected my new windows laptop to either of the 2 usb c pd on the 100ac, my laptop gets charged at around only 20W, instead of 55 to 60W. The same ports charge other devices and laptops at proper 55 to 60W rate. Is there a reason and a fix for this? Thank you in advance! Sreen
-
Not recharging
I have a 2 year old venture 70 that has had only modest use and no abuse. Did not get much use during pandemic. It will no longer charge. I have tried a reset. Seems too young to have died?
-
Goal Zero used to charge e-motorcycle
Has anyone tried to charge an Electric motorcycle (like Zero DS) with a goal zero battery bank? Can you use a SHERPA 100AC to charge an electric motorcycle??