-
Yeti 1500x not charging off solar
I recently got a yeti 1500x and installed 4 1500v 16 amp panels on my car. The panels are pushing power all the way to the plug for the battery but when plugged in no incoming wattage is shown. The blue light comes on as if it was charging but nothing more than that.
-
Connecting Yeti 1000core to 2 boulder 100s at a distance of about 20+ feet
I just purchased a Yeti 1000core and 2 boulder 100 solar panels. The location in my yard that will receive the most sunlight is about 20 to 25ft from the location in my house where we will be keeping the Yeti. What cables, adaptors and/or connectors do I need to get started. Thanks.
-
Yeti 400 Lithium won't charge past 70%
Hello I have a 4 year old Yeti 400 Lithium. For the past year, it won't charge past 70%; either when charging from AC, or from DC. I've tried resetting the display (hold unit + info button for several seconds). Any suggestions?
-
Remote Display for Yeti 1000 Power Station
I have a had a yeti 1000 power station for a few years now and have it integrated into our camper's power system. I am wondering if anyone has incorporated a remote display with their power station. Where ours is stored is a bit out of the way and hard to see the display screen.
-
GZ 1500X will no longer charge
Was working fine until ... it wasn't. Tried 3 different chargers (all work fine on another 3000X I have. When I plug them into the 1500X - nothing happens. Can't check whether my GZ panels will work as it is raining here. Was able to start it charging via USB-C port for a short period. Now, not even that work. Tried the…
-
Replacement AC charger for Yeti 400 Lithium
I have a Yeti 400 Lithium batteri and solar panel. But I miss the AC charger. What charger is needed? And where can I buy one? Thanks :-)
-
Yeti 200x
Anyone have issues with the red light coming on when you press the AC port. Mine immediately turns red when I press the button.
-
First cigarette light port not working then usb ports not working yeti 500
Got my Yeti 500 and nomad 50 in April 2023. First time out the cigarette lighter port did not work but the usb ports worked fine, second use months later the cigarette port work fine and the usb ports did not work. any idea what up with this? I am also a Goal Zero distributor in Durango CO and would really like to know if…
-
Will Yeti completely drain expansion tank battery to charge itself?
I have a Yeti 3000 with 2 tank expansion batteries. I'm wondering what happens if I have a heater running overnight in my van and the Yeti drains the tanks to keep itself charged (I think that's what it does?). If it's unattended (I'm asleep), will it empty them completely and so impair the life of the tank batteries or…
-
600 watt power supply settles in at 50w charging YetiX 1500
I bought the YetiX 1500 and the 600w charger at the same time. Have tried many times to charge the 1500 with it, and when it first starts charging, it shows the rate at nearly 600w. But it only holds that rate for about one minute. Then for no apparent reason, the charging rate sits back down to about 50w. I can turn off…
-
Boulder BC panels to Yeti 1500x
When attaching my two Boulder 100 briefcase panels and one Boulder 200 briefcase panel to my Yeti 1500 power station. The information screen will initially show that I am receiving 330 - 350 watts of input power and then will quickly reduce down to 150 - 160 watts of input. The panels are all connected individually as…
-
yetti 400 lithium not storing power from charger-wall
i yetti 400 drained to zero unattended and when i arrived, i plugged the charger back to wall, it has been 24 hours now of charging with all lights indicating watts in.... but after 24 hours the charging indicator still flashing at 20% ..... unplugged the charger after 24 hours and yetti 400 is dead. how to reset? or is it…
-
Is this an indication of a bad battery or a bad charger? The 20% band flashes.
-
Goal Zero Yeti 200x Issues
I have a Goal Zero 200x that has started to behave strangely. I have the unit plugged into AC power in my home office as before, but it now exhibits the following behavior: When charging reaches 100%, after a short time (a few hours), the red overtemp icon comes on. If I unplug the unit from AC, it drains to empty quickly…
-
Yeti 1500 turns off in standby mode
Just got new Yeti 1500 a couple of weeks ago and left it on fully charged like it says in the manual. The screen is lit up, showing the battery charge, etc. The unit is not connected to anything. After every few days the unit seems to shut off with screen going dark. Unplugging and plugging back resolves the problem and…
-
Best way to create a 12V circuit for a Shelter, using the goal zero 1500x. (Including parts).
Hello, I have a little shelter that I used to a workshop garage and a staycation. Which is the best setup that you think I could develop to have: *USB ports for charging *Switch or buttons to turn on the lights and USB charger wall. *Type of cables and connectors (AWG, DC, HPP, etc) *LED Lights *Fuse Box Do you have some…
-
GZ 1400 Lithium not charging on solar panels
We just purchased a 2018 camper van that came with GZ Yeti 1400 Lithium portable power station and a Yeti Link Model 98200, attached to two 100 watt Renogy solar panels. The unit charges when connected to house power as well as when van motor is running (through Link) but in mid-day full sun, while the blue input light is…
-
The button INFO of my Yeti 1500x doesn't do anything
Do you know if it is normal that the INFO button of my Yeti 1500x doesn't do anything when I press it? I assume and read that when you press it should change through time to fill or battery time to discharge... but it doesn't do anything.. Do you have any suggestion to reset that button?
-
Connect 100 and 200 boulder briefcase solar paneles to a Yeti 1500x
Do you know which is the right way to connect in chain my 100 and 200 boulder briefcases to my Yeti 1500x? Which cables or connectors I have to buy? thanks
-
How to savely dispose of that thing?
fails to charge after 2 years of light duty on the charger , does not display charge current from charger or solar panel.
-
Blinking blue input light
Is the blue input light supposed to blink constantly? If not, what have I done wrong?
-
Iceco fridge tripping 12V breaker
I have Yeti 1000x that came as an original equipment with my truck camper, the Iceco fridge is occasionally tripping 12V breaker, after resetting the output is working fine for awhile, but it's not reliable.
-
Yeti 1500X - Display Won't Stay Off
I'm having a bit of an annoying issue with my 1500X - when I turn the display off, it never stays turned off. I think it's an issue with the solar power being intermittent - essentially whenever it sees solar input it turns the display on. Since my camper (where the Yeti lives) is often in partial shade, this means it's…
-
Water damage
Rain water got into my Goal Zero Yeti 150. It's not working Is this something that can be solved w a new battery or do I need to buy a new generator?
-
Yeti 1400 not charging
Just purchased a 98350 YETI X 230W 120V Power Supply wall charger. Whenever I plug it in the yeti tries to charge, fans turn on them in about 2 seconds it stops, 10 seconds later it tries again then stops this process repeats itself indefinitely.
-
Yeti 200x wont charge past 7%
After several hours, max 7 % charged. When plugging it it sounds like small fan goes on but that stops quickly. I charged it for 6 hours and no higher than 7. Plugged laptop into it and lost the juice in a few minutes. Tried to reset holding 12v and AC and nothing. 18 months old.
-
Can I plug both a Nomad 100 and Nomad 200 into my Yeti 1000X at the same time?
I have a nomad 100 with an 8MM output and a Nomad 200 with a HPP output Can I plug them both into the Yeti 100X at the same time ?
-
Link Battery Module not working
So I have an off grid cabin used from April to October only , I have a Yet 1400 with the Link module attached to 4 6V 220ah lead acid batteries .I have 600 watts of roof panels with excellent south facing exposure . My main power use is a 12 V hi efficiency fridge , some tactical nite lights , and 2 fans for hot nites .…
-
uPd under output?
When using my 3000x I sometimes see a flashing "uPd" code on the screen under the output section. There isn't any description of what this means in the manual. Is it simply "updating" for the output measurement or something else?
-
Firmware update hangs
I have the Goal Zero 3000. I tried to do the firmware update from 1.8 to 1.86, and at first I couldn’t get the connection to remain stable. After about two hours of resetting and the like I got the stable link, but when I click update the firmware, nothing happens. I click it again, and it says that it is in progress, but…