-
My Yeti 1500x doesn’t output AC
Hi, suddenly my yeti 1500x stopped outputting AC. When I turn on AC output, I hear a brief sound of the fan and subtle beeps by 10 times. The battery is charged 100% and didn’t have any issue until this morning. I have updated the firmware with the latest version but no avail. Appreciate any tips how to fix this issue…
-
yetti 400 lithium not storing power from charger-wall
i yetti 400 drained to zero unattended and when i arrived, i plugged the charger back to wall, it has been 24 hours now of charging with all lights indicating watts in.... but after 24 hours the charging indicator still flashing at 20% ..... unplugged the charger after 24 hours and yetti 400 is dead. how to reset? or is it…
-
Is this an indication of a bad battery or a bad charger? The 20% band flashes.
-
Goal Zero Yeti 200x Issues
I have a Goal Zero 200x that has started to behave strangely. I have the unit plugged into AC power in my home office as before, but it now exhibits the following behavior: When charging reaches 100%, after a short time (a few hours), the red overtemp icon comes on. If I unplug the unit from AC, it drains to empty quickly…
-
Yeti 500X to charge Macbook Pro 16''
When using USB-C PD to charge a Macbook Pro 16'' the charge does not work, but only the Macbook rings continuously. Also, the Yeti's display shows 0 W from Output. Is this particular unit wrong? I purchased 2 of them and they acted the same. In the advertised video here…
-
Yeti 1500 turns off in standby mode
Just got new Yeti 1500 a couple of weeks ago and left it on fully charged like it says in the manual. The screen is lit up, showing the battery charge, etc. The unit is not connected to anything. After every few days the unit seems to shut off with screen going dark. Unplugging and plugging back resolves the problem and…
-
Best way to create a 12V circuit for a Shelter, using the goal zero 1500x. (Including parts).
Hello, I have a little shelter that I used to a workshop garage and a staycation. Which is the best setup that you think I could develop to have: *USB ports for charging *Switch or buttons to turn on the lights and USB charger wall. *Type of cables and connectors (AWG, DC, HPP, etc) *LED Lights *Fuse Box Do you have some…
-
GZ 1400 Lithium not charging on solar panels
We just purchased a 2018 camper van that came with GZ Yeti 1400 Lithium portable power station and a Yeti Link Model 98200, attached to two 100 watt Renogy solar panels. The unit charges when connected to house power as well as when van motor is running (through Link) but in mid-day full sun, while the blue input light is…
-
The button INFO of my Yeti 1500x doesn't do anything
Do you know if it is normal that the INFO button of my Yeti 1500x doesn't do anything when I press it? I assume and read that when you press it should change through time to fill or battery time to discharge... but it doesn't do anything.. Do you have any suggestion to reset that button?
-
Connect 100 and 200 boulder briefcase solar paneles to a Yeti 1500x
Do you know which is the right way to connect in chain my 100 and 200 boulder briefcases to my Yeti 1500x? Which cables or connectors I have to buy? thanks
-
Amount of Panel Watts per kW-hr battery system
I have been testing my new power stations I received about the middle of September. The intent is to verify that they will perform as I need when the time comes. I have one Yeti 200X and one Yeti 1500X. The Yeti 200X was ordered with a 20W Nomad Panel, and the 1500X was ordered with a 100W Boulder Briefcase Panel. I…
-
How to savely dispose of that thing?
fails to charge after 2 years of light duty on the charger , does not display charge current from charger or solar panel.
-
Blinking blue input light
Is the blue input light supposed to blink constantly? If not, what have I done wrong?
-
Iceco fridge tripping 12V breaker
I have Yeti 1000x that came as an original equipment with my truck camper, the Iceco fridge is occasionally tripping 12V breaker, after resetting the output is working fine for awhile, but it's not reliable.
-
Can I use the two HPP of my Yeti 1500x simultaneosly?
I want to connect 4 diesel heaters (from 5KW to 8KW, 12V)... the specs of the yeti 1500x says: 2x High Power Port: 360W Max (12V, up to 30A), regulated; Front face & under lid Do you think if I use 2 diesel heaters in the front port and 2 diesel heaters under lid could work?
-
Yeti 1500X - Display Won't Stay Off
I'm having a bit of an annoying issue with my 1500X - when I turn the display off, it never stays turned off. I think it's an issue with the solar power being intermittent - essentially whenever it sees solar input it turns the display on. Since my camper (where the Yeti lives) is often in partial shade, this means it's…
-
Water damage
Rain water got into my Goal Zero Yeti 150. It's not working Is this something that can be solved w a new battery or do I need to buy a new generator?
-
Yeti 1400 not charging
Just purchased a 98350 YETI X 230W 120V Power Supply wall charger. Whenever I plug it in the yeti tries to charge, fans turn on them in about 2 seconds it stops, 10 seconds later it tries again then stops this process repeats itself indefinitely.
-
Display will not turn off Yeti 200
Came back to camp, my solar panel was hooked up and my display was on. I could not get the display to turn off, and the battery would not charge. At some point it quit charging as it was at 88%. I took it home and charged it which solved the problem of the display. The display discharged about 4% of the capacity per day. I…
-
Yeti 200x wont charge past 7%
After several hours, max 7 % charged. When plugging it it sounds like small fan goes on but that stops quickly. I charged it for 6 hours and no higher than 7. Plugged laptop into it and lost the juice in a few minutes. Tried to reset holding 12v and AC and nothing. 18 months old.
-
Can I plug both a Nomad 100 and Nomad 200 into my Yeti 1000X at the same time?
I have a nomad 100 with an 8MM output and a Nomad 200 with a HPP output Can I plug them both into the Yeti 100X at the same time ?
-
Link Battery Module not working
So I have an off grid cabin used from April to October only , I have a Yet 1400 with the Link module attached to 4 6V 220ah lead acid batteries .I have 600 watts of roof panels with excellent south facing exposure . My main power use is a 12 V hi efficiency fridge , some tactical nite lights , and 2 fans for hot nites .…
-
uPd under output?
When using my 3000x I sometimes see a flashing "uPd" code on the screen under the output section. There isn't any description of what this means in the manual. Is it simply "updating" for the output measurement or something else?
-
Firmware update hangs
I have the Goal Zero 3000. I tried to do the firmware update from 1.8 to 1.86, and at first I couldn’t get the connection to remain stable. After about two hours of resetting and the like I got the stable link, but when I click update the firmware, nothing happens. I click it again, and it says that it is in progress, but…
-
Costs of Battery Replacment
Hi, l would like to know the costs of the battery replacment service provided by goal zero. Especially interested in the 3000x model, but also in general. Thanks
-
Putting my yeti 6000x in a weather proof enclosure, bad idea?
I have a yeti 6000x that I need to have outside near the solar panels. It will be on a covered porch so it would not get too wet leaving it out. But I want to put it in a weatherproof container. I would prefer a container not much bigger than the yeti. Do I need to worry about air circulation? If so, would drilling a few…
-
Battery Trade-in program
LOVE my YETI 1000. But after 3 years as the only electric source i have in my tiny trailer home, it doesnt have the capacity it once held. Seems a trade-in program would be the best ECO practices to follow. Does Goal Zero have a Responsibility Plan to deal with the discharged battery from their products ending up in…
-
Shipping to Asia ?
I am from New York City, and I was wondering if I can purchase a Yeti 6000x with the appropriate solar panels and have it shipped to Manila, Philippines from your website. This is an international shipping question. Thanks.
-
Incorrect voltage showing in App for Yeti 1500X
Hi, My Yeti 1500X 230V/240V incorrectly shows input voltage as 120V in the App. This is a persistent problem that has survived firmware upgrade, device resets, discharge to flat/recharge, App uninstall/resintall with clearing of cache and data on Android. How do I get the app to show the voltage it's actually operating at?…
-
I am new to Goal Zero and have a question about protective boxes.
I need to charge (using the Goal Zero 12v charger) my new 500x in my truck bed. I don't have a camper shell and want to protect the unit from dust and rain. Any tips on boxes? Would it get too hot in a cooler?