-
1500X won't charge if both DC to DC and Power Supply plugged in
Is this normal? I have the 1500X installed in my trailer, and have a DC to DC charger plugged into the barrel connector under the 'lid'. No power is being supplied to it (It is powered through the 7 pin connector, and it is not plugged in). If I also plug in the AC adapter that came with it in the front barrel connector, I…
-
Display will not turn off Yeti 200
Came back to camp, my solar panel was hooked up and my display was on. I could not get the display to turn off, and the battery would not charge. At some point it quit charging as it was at 88%. I took it home and charged it which solved the problem of the display. The display discharged about 4% of the capacity per day. I…
-
1500X Firmware Update not completing - breaks Yeti
I initiated a firmware update using the iPhone app. According to the app, the Yeti has been updated to version 1.8.9. Seems odd, as I believe the latest version is 1.8.8. On the Yeti itself, it keeps flashing "upd", as if the firmware was not applied. I've followed the steps…
-
How to force firmware update on Yeti 700?
I just bought a brand new Yeti 700 direct from Goal Zero. The App reports that it has the original firmware version 1.1.6. Firmware version 1.3.1 was released over 4 months ago. When I try to update from the App I get the error message. "Update failed. Try again later. A similar update has already been scheduled". This…
-
Yeti 200x USB-C 60W PD Input/Output port doesn’t seem to work
Hi there, I just bought a Yeti 200x about a week ago and I’m pretty satisfied with the purchase except one thing. When I connect my iPhone charging cable to the USB-C port with 60W PD input/output, nothing happens. USB white LED light is on & all other 3 ports worked fine. Also, can I use the MacBook Pro 70W power adapter…
-
500x, only charges via usb-c
as the title says, the banks will no longer take juice from the input jacks, front nor rear. I know its not the adapter as it works fine on my other battery bank. have tried: three button reset, two button reset, opening and disconnecting the red and black connectors to reset the BMS. but no change. have been stored…
-
500x stopped working then started smoking.
goal zero 500x didn’t want to turn on then flashed on and off a handful of times then emmited horrible burning smell and started smoking. Now big suprise it won’t turn on, unit seems smoked no pun intended. How do I go about filing warranty claim
-
Yeti 1250 - Power not staying on
Hey Team I've had my Yeti 1250 since 2012. I love it and have always cared for it. Recently it has had issues staying on, so I assumed that the battery finally gave up the ghost. It would only stay on when plugged into the wall. The battery reads 11.33 volts. Even when I plugged it into the wall it seemed like I would have…
-
200x Shows 100% charge but dies after unplugging
Just curious if anyone else has had this issue. Title says it all. Unit shows full-charge but upon unplugging from wall instantly dies.
-
Yeti 700 Error Message
Just got my replacement Yeti 700 today, my previous unit had a serious charging issue and was deemed defective. When I received my new 700, it had approximately 80% charge, so I plugged it in to a standard 110V outlet. While it was charging, I paired the new unit to the GZ app. A short time later, I got the following error…
-
Yeti 300/500/700 technical questions before buy
After one month on market there are no reviews/tests from the new Yeti somewhere in the web (except Amazon, but it's influencer rigmarole 🙄). Before I buy (if available in the EU) there are some technical questions. Minimal wattage to start solar charging? (very imported) Efficiency of AC? Efficiency of 12 volt and USB?…
-
Yeti 4000 Pro connected to alternator via lithium start battery
I just installed an Antigravity H6/Group-48 Lithium Car Battery in my truck. Due to the higher resting voltage, my Yeti 4000 pro pulled enough current that the BMS disconnected the battery terminals from the cells. Is it possible to adjust the low voltage threshold for the HP DC Input port? I could not find any information…
-
Hi. What it meaning?
-
Replacement manual
i cannot find the manual for our Yeti 1400. How con I obtain a replacement?
-
Amount of Panel Watts per kW-hr battery system
I have been testing my new power stations I received about the middle of September. The intent is to verify that they will perform as I need when the time comes. I have one Yeti 200X and one Yeti 1500X. The Yeti 200X was ordered with a 20W Nomad Panel, and the 1500X was ordered with a 100W Boulder Briefcase Panel. I…
-
Small wind turbine
Hi - I'd like to get a small wind turbine to work with my Yeti (1500X). I saw an earlier thread that didn't really have an answer, beyond 24V as the input goal. Any other advice? Team YETI/Goal Zero, this seems like one that the corporate office should be interested in, no? I would happily buy something that was guaranteed…
-
My history is not working in the app
I have yeti1500x and yeti link And in the app the history is blank . It worked in the past Filmwhare version is 18.8 I did reset the unit but did not work I reinstalled the app did not work What can i do ????
-
Yeti 200x stopped charging from rear input
My yeti 200x stopped charging from the rear input. I can charge it from usb c input on the front. I have tried resetting the device multiple times. I have used different goal zero chargers that I have used successfully on my other yetis but don’t work on this 200x. Seems like the input is dead. Is there a fix for this? Can…
-
Yeti 300 Fan Behavior and Overtemp Warning
I got a new Yeti 300 recently and I've been putting it thru some typical usage scenarios. My experience so far has been that the way the fans are controlled makes it quite easy for it to end up with the overtemp warning on in normal use in a ~70f air conditioned room. As far as I can tell, there are 3 fans in the Yeti 300.…
-
Update impossible yeti 1500x
Hi, is impossible to update firmwqre, i have 1.3.0 and try to update 1.8.8 I can t cloud connect… with direct connect i clic on update... after connect to wifi... station make 15 bip bip... i wait 10 minut... reconnect and formware no updated... Can you help me? thx
-
Yeti 500 Dead, Not Charging
Yes I have contacted the customer support line but have not heard from them since I gave up on a phone call Monday and still not received an email reply. I have a Yeti 500 that has been plugged into AC power since I bought it in June (as recommended by the website), it has not been used other than some testing with the…
-
Yeti 1000 question
Trying to figure out what is going on with my Yeti 1000. Had to replace the charger and now I get this. It was out of action for months, so maybe the battery is no longer in good shape… but this seems to be something else.
-
1500X surge
What are the odds of the 1500X handling the surge of a typical 1000W vacuum cleaner? Has anyone tried it?
-
Yeti 6000X the 230VAC is faulty
Does anyone have experience of which electrical components usually fail in a 230 inverter? I need the 6000X very urgently and there are no spare parts available in Europe? Can anyone give me a tip? I am able to replace the components myself.
-
Moving to Hawaii
Anyone know how I can ship my yeti 3000x and yeti 1400 to Hawaii? I have been having trouble finding a shipping company that can do this for me. UPS and FEDEX require you to be certified to ship these items.
-
3000x 12V Power Pole Switched?
Hello, Is the 12v power pole port under the lid on the 3000x switched off when you turn off the 12v with the button up front? I'm away from my unit now so I can't test it in person. Thanks Mike
-
Yeti Link Recall - Fire Hazard
Posting here because I didn't get a notification for this, and others may not have either. Apparently there is a recall on the Link module and extention cable used for the vehicle integration kit. I only found out because after more than a year of trying get the kit to work I was told my unit was defective (aside from the…
-
No consistent solar charging
I leave my 4 boulder 100 panels plugged into my yeti 6000x. Additionally I have my 6000x integrated into my house and occasionally run small portions of my house off the panels. Every so often, my panels register 0 watts in and I have to disconnect the plug and reinsert to get them to start produce power again. Is this and…
-
6000x charging/using
This might be a lengthy question so bare with me. First off, I im running my solar/6000x as a standalone system that is integrated into my house, meaning that I don't charge my 6000x from my house but from 4 boulder 100s I have installed on my house. My first question is, is there any long term effects of leaving the 6000x…
-
Maximum HPP wattage input for Yeti 6000X?
I see partial answers on other questions, but none for the 6000x specifically. I have a 6000x and would like to max out the 600W max @ 34V as often as possible (it's charging my Nissan Leaf and works great!) So, given that you only reliably get half the spec'd wattage for solar panels on average, but sometimes closer to…